GIGABYTE TXE169 16-Port Gigabit Switch
- June 5, 2024
- Gigabyte
Table of Contents
GIGABYTE TXE169 16-Port Gigabit Switch
About This Guide
- The TXE169 16-Port Gigabit Desktop Switch is a stand-alone plug and-play device. This install guide gives step-by-step instructions for setting up the device.
Package Contents:
- TXE169 16-Port 10/100/1000 BASE-T Gigabit Ethernet
- Switch
- AC power cord
- Screws and two mounting brackets
- Quick Install Guide
Before Connecting to the Network
- As with any electronic device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference.
Specifically, the site you select should meet the following requirements:
- Install the switch in a fairly cool and dry place. See
- Technical Specifications page in the manual for the acceptable operating temperature and humidity ranges
- Install the switch in a site free from vibration, dust, and direct sunlight
- Leave at least 10 cm of space on the left and right-hand side of the switch for ventilation
- Visually inspect the power cable and ensure that it is firmly inserted into a suitable power outlet.
Switch Installation
- The TXE169 may be mounted in an ElA standard 19-inch rack or it may be placed on a desktop or shelf.
Rack Installation
- To install in a rack, attach the mounting brackets to the switch’s side panels (one on each side) and secure them with the screws provided.
- Then, use the hardware provided with the equipment rack to mount the switch in the rack.
Connecting the TXE169 to your Network
Power
- The switch can be used with AC power sources 100 240 VAC, 50-60 Hz. The switch’s power supply will adjust to the local power source automatically and may be turned on without having any or all LAN segment cables connected.
Ethernet
- These ports support network speeds of 10 Mbps, 100 Mbps, or 1000 Mbps, and can operate in half-duplex and full-duplex transfer modes.
- These ports also support automatic MDI/MDIX crossover detection, which gives the switch true “plug and play” capabilities, Just connect any network cable between the switch and the device, and the switch will automatically detect the settings of the device and adjust itself accordingly.
LED Indicators
- The LED indicators allow you to monitor, diagnose, and troubleshoot potential problems with the switch, connection, or attached devices.
DIP Switches
- The DIP switches on the front panel allow easy configuration of the advanced features of the TXE169
Port Isolation
- When enabled, ports 1 to 14 will be isolated from each other, but will still be able to communicate with port 15 and 16. Port 15 & 16 will be able to communicate with all the ports available on this switch.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>