ORTECH 2135-3CCT LED Flush Mounts Instruction Manual
- June 6, 2024
- Ortech
Table of Contents
ORTECH 2135-3CCT LED Flush Mounts
INTRODUCTION
WARNING — THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.
- LED Flush Mounts are suitable for use in damp locations
- Please keep the LED Flush Mounts away from any corrosive substance, and please use a dry cloth when you clean it
- LED Flush Mounts can only be installed by a qualified electrician
- Before installation or maintenance, please disconnect the power to prevent electric shock
Application Notice
- Turn OFF the power supply at the fuse or circuit breaker box before you install the fixture
- Ground the fixture to avoid potential electric shocks and to ensure reliable starting
- Double-check all connections to be sure they are tight and correct
- Wear rubber-soled shoes and work on a sturdy wooden ladder
- This fixture is designed for use in a circuit protected by a fuse or circuit breaker. The fixture is also designed to be installed under local electrical codes. If you are unsure about your wiring, consult a qualified electrician or local electrical inspector, and check your local electrical code
- WARNING — RISK OF CUTS: Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts
- WARNING — RISK OF FIRE: Use 120V AC 50/60Hz circuits
- DO NOT change the LED light source or driver inside under any circumstance
- DO NOT cover the fixture with any heat-insulated materials
CAUTION
PLEASE READ THE INSTRUCTIONS BEFORE COMMENCING INSTALLATION AND RETAIN THEM
FOR FUTURE REFERENCE. Electrical products can cause death injury, or property
damage. If in any doubt about the installation or use of this product, consult
a competent electrician.
INSTALLATION GUIDE
Embedded in Installation
- Remove trim and existing lamp from recessed fixture
- Screw E26 socket 2. adapter into socket 2. in the housing
- Press the friction blade to 3. Insert the lamp into the 3. housing and restore power
Surface Mounting Installation
- Fixing bracket on terminal box
- Connecting the wire
- Fixing the lamp body on the bracket and fix tightly
ORTECH reserves the right to modify at any time, without notice, any or all of our product’s features, designs, components, and specifications to meet market changes.
- [email protected]
- www.ortechindustries.com
- 13376 Comber Way
- Surrey BC V3W 5V9
- 375 Admiral Blvd
- Mississauga, ON L5T 2N1
- 1-888-543-6473
- 1-888-541-6474
Specifications
- Model Numbers: 2135-3CCT, 2180-3CCT, 2225-3CCT, 2300-3CCT
- Suitable for damp locations
- Designed for 120V AC 50/60Hz circuits
- Do not change the LED light source or driver
- Avoid covering the fixture with heat-insulated materials
FAQ
Q: Can I install the LED Flush Mounts myself?
A: LED Flush Mounts should only be installed by a qualified electrician to ensure safety and proper installation.
Q: Can I change the LED light source or driver inside the fixture?
A: It is strongly advised not to change the LED light source or driver under any circumstance. Consult a professional if needed.
Q: What should I do if I encounter sharp edges on the fixture?
A: Wear gloves when handling the parts to prevent cuts and scrapes from sharp metal edges.
Q: How should I clean the LED Flush Mounts?
A: Clean the fixture with a dry cloth and avoid using any corrosive substances.