Scx Design S49 Speaker Sound Mini 2x3W Instruction Manual
- June 5, 2024
- SCX Design
Table of Contents
Scx Design S49 Speaker Sound Mini 2x3W
Please read this instruction manual carefully before using the product.
Product specifications
- Output Power: 2x3W
- Battery capacity: 500mAh
- Charging time: 2.5 hours
- Playtime: 6 hours
- Material: ABS soft-touch finish
- Weight: 70g
- Dimensions: 75 x 41 mm
- Includes a USB-C charging cable.
Main functions
-
Start-up and wireless pairing
Press one time the power button at the back of the product. Once the product is on, connect with «S49» in your device’s wireless settings.
Once paired, your device will automatically connect to the speaker.
After 10 minutes of inactivity, the speaker will automatically turn off. To turn off the speaker, press the power button for 5 seconds. -
Charging the battery
Your speaker is equipped with a battery and can be used wirelessly. When the battery is running low, you can charge it with the included USB-C cable. -
Handsfree calls
With the integrated microphone, this speaker can be used for conference calls. -
The stereo pairing of two speakers
-
Press the power button on each speaker to power them on.
-
Long-press one of the speaker power buttons for 1 second.
A short sound will confirm that the speakers are paired together. -
Select «S49» in your device’s wireless settings.
-
To disconnect the stereo speakers, double click on any speaker power button.
Warning!
Do not place or use this product near a source of high temperature or in a
humid environment.
Keep the speaker out of reach of children.
Never Store or use this product in temperatures below 32°F (0°C) or above
115°F (45°C).
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.