SCX Design CTEK079 Foldable Induction Mouse Pad Instruction Manual
- June 15, 2024
- SCX Design
Table of Contents
SCX Design CTEK079 Foldable Induction Mouse Pad
Instruction Manual
Foldable induction mouse pad CTEK079
Please read the instruction manual carefully before using the product.
Product specifications:
Materials: ABS
Type-C input: 5V 2A, 9V 1.67A
Induction: 5V1A, 9V 1.1A
Weight: 155g
Dimensions: 22 x 9.5 x 1.4cm
The product includes a Type C fast charging cable made in
from recycled plastic.
Features:
Unfold the mousepad and lay it at so that the plate marked with the logo is
visible.
Turn on the product by plugin it with a power source. To see if it works, just
check if the logo light on.
Make sure your device is compatible with induction charging.
Put your device on the surface indicated for this purpose on the mousepad,
the device will switch on charging mode.
Remarks:
Some phone cases may block the wireless charging function. Do not place other
objects and especially nothing magnetic between the charging device and the
charger while switched on.
In order to ensure optimal charging and use of the product, make sure to place
your device exactly on the charging area.
Warning
Do not expose to dust, sunlight, under conditions like humid weather, humidity
or high temperatures and avoid mechanical shocks. Never carry the product by
plugged cables.
If the power cable is damaged, it must be replaced by the manufacturer, its
after-sales service or by a qualified person, to avoid any danger.
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
SAFETY WARNING
In order to prevent conditions. that can lead to overheating. Please make sure that the wireless charging pad surface is free of all metal objects at all times, such as coins or paper clips. In addition, before charging, please remove anything metallic attached to the back of the phone, such as battery cases, ring holders, or plates used for mounting to magnetic phone holders.
Customer Support
Made in China
FCC ID: 2A2OH-O26-CTEK079