TARAMPS SL 1K6 Free Shipping Worldwide User Manual

TARAMPS SL 1K6 Free Shipping Worldwide

Specifications

• RMS Power: 800 W
• Musical Program Power: 1,600 W
• Nominal Impedance: 4 or 8 Ohms
• Resistance (RE): 3.0 / 5.9 ohms/VCC
• NO (Efficiency Reference): 1.143%
• Diaphragm Mass (MMD): 157.537 g
• Total Mass (MMS): 172.183 g
• BL Product: 15,120 TM
• Mechanical Q (Qms): 13.531
• Electric Q (Qes): 0.543
• Total Q (Qts): 0.522
• Compliance (CMS): 87.655u M/N
• Equivalent Volume (VAS): 93.282 L
• Sensitivity (@ 1W, 1 m)-Free-Air: 92.597 dB
• Frequency Response: 30 to 1,400 Hz
• Resonance Frequency: 40.967 Hz
• Effective Cone Area (SD): 0.0857 Sq.m
• Cone Excursion Without Distortion (X MAX): +11.5 mm
• Flow Density in the Gap: 8,470 GAUSS

Mechanical Parameters

• Nominal Diameter: 15 Inches
• Ferrite Measures: 200 x 25 mm
• Coil Diameter: 4 Inches
• Coil Height: 29 mm
• Coil Wire Material: Copper
• Coil Wire Section: Round Fiber 12 mm
• Coil Shape: Aluminum Barium
• Gap Height: 11.6 Kg
• Housing Material: 6.0 Liters

Product Dimensions

• Cabinet Suggestion: Vented Box
• Volume Liters: 80, 100, 120
• Ducts Quant.: 03
• Ducts Diam.: 4(POL)
• Ducts Depth: 365.1 mm, 420.8 mm, 405.7 mm
• Syntony: 42 Hz, 38 Hz, 35 Hz
• (H.P.F): 30 Hz
• Attenuation (Active): -24 dB/Octave

INTRODUCTION

The SL 1K6 model was designed to reproduce the subbass and bass, in automotive sound systems and professional performance systems (bands, concerts, bars, churches, outdoor systems, theaters, cinemas and etc.
We invite you to immerse yourself in a sound experience, where low frequencies are harmonized with great fidelity, through velvety bass and clean timbres.

ELECTRIC PARAMETERS

MECHANICAL PARAMETERS

Thiele-Small parameters are obtained after applying a sinusoidal level of 50 hz for a period of 30 minutes. A tolerance of + – 15% on the specified values is allowed..

CABINET SUGGESTION

MODEL

| VOLUME| DUCTS| DUCTS| DUCTS| SYNTONY| (H.P.F)| ATTENUATION
---|---|---|---|---|---|---|---
LITERS| QUANT.| DIAM.| DEPTH| | | (ACTIVE)

VENTED BOX

| 80| 03| 4″(POL)| 365,1 mm| 42 Hz| 30 Hz| – 24 dB/ Octave
100| 03| 4″(POL)| 420,8 mm| 38 Hz| 30 Hz| – 24 dB/ Octave
120| 03| 4″(POL)| 405,7 mm| 35 Hz| 30 Hz| – 24 dB/ Octave

PRODUCT DIMENSIONS

SUGGESTIVE MEASURES
*For professional lines, it is mandatory to use a co on or glass wool blanket

Rod. Julio Budisk SP 501 s/n, – Compl. KM 30-A /SP ZIP 19.180-000 Phone +55 (18) 3266-4050 CNPJ (National Registry): 23.372.795/0001-64
NOTE: Features, specifications and aesthetics are subject to change without notice.

WARRANTY TERM

When all our products are produced, they undergo rigorous evaluations, in each construction process until they are packaged, however, if any type of abnormality is detected, when opening the package, it must be sent to one of our authorized service stations , or directly to the factory, if there is not an authorized technitian in your region. Each and every product must undergo a technical evaluation so that the defect is identified and proven.
The product has a warranty of 15 (fifteen) months after the issuance of the invoice, with the legal warranty of 90 days, provided for in article 26, item ll, of law No. 8078/90 ( Brazilian consumer protection code).

Warranty Conditions
The product must be installed correctly, by a specialized professional, as well as respecting the product characteristics.

The customer will NOT have the warranty when

• Exceed the period of 15 (fifteen) months.
• Damages incurred are caused by; transport or handling accident, or humidity.
• Defects caused by improper installation.
• Malfunctions in product parts (torn cone/dust cap, bent or broken speaker housing).
• Coils burned out by excessive power or extreme distortion conditions, causing heating above 240º.

Warranty Coverage:

• Taramps guarantees its products against any defect in material or manufacturing process, provided that, at the discretion of its authorized technicians, it is found to be defective under normal conditions of use.
• The PRODUCT must contain the original label, on which its serial number is inserted.
• To use the warranty, the customer must present the invoice and the warranty term, both of which must contain the serial number on the product label.

Transport

Only products that fall under the terms of warranty coverage will have their transportation expenses covered, otherwise, the expense will be at the customer’s expense.

WARRANTY CERTIFICATE

• NAME:
• ADDRESS:
• ADDRESS:
• DEALER:
• CITY:
• CITY:
• STATE
• ZIP:
• FHONE
• PHONE

INVOICE NUMBER

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>