BALLUFF BES05KH Inductive Standard Sensors Owner’s Manual

June 3, 2024
BALLUFF

BALLUFF BES05KH Inductive Standard Sensors

BALLUFF BES05KH Inductive Standard Sensors-fig1

Dimension

BALLUFF BES05KH Inductive Standard Sensorsfig2

  • Basic features

    • Approval/Conformity CE cULus EAC WEEE
    • Basic standard IEC 60947-5-2
  • Display/Operation

    • Function indicator yes
    • Power indicator no
  • Electrical connection

    • Connection M12x1-Male, 3-pin, A-coded
    • Polarity reversal protected yes
    • Protection against device mix-ups yes
    • Short-circuit protection yes
  • Electrical data

    • Load capacitance max. at Ue 1.5 µF
    • Min. operating current Im 0 mA
    • No-load current Io max., damped 11 mA
    • No-load current Io max., undamped 7 mA
    • Operating voltage Ub 10…30 VDC
    • Output resistance Ra 47.0 kOhm
    • Protection class II
    • Rated insulation voltage Ui 250 V AC
    • Rated operating current Ie 200 mA
    • Rated operating voltage Ue DC 24 V
    • Rated short circuit current 100 A
    • Ready delay tv max. 35 ms
    • Residual current Ir max. 100 µA
    • Ripple max. (% of Ue) 15 %
    • Switching frequency 500 Hz
    • Utilization category DC -13
    • Voltage drop static max. 1.3 V
  • Environmental conditions

    • Ambient temperature -25…70 °C
    • Contamination scale 3
    • EN 60068-2-27, Shock Half-sinus, 30 g , 11 ms
    • EN 60068-2-6, Vibration 55 Hz, amplitude 1 mm, 3×30 min
    • IP rating IP68, according to BWN Pr 20
  • Functional safety
    MTTF (40 °C) 625 a

  • Interface
    Switching output PNP normally open (NO)

  • Material

    • Housing material Brass, Nickel-free coated
    • Material sensing surface PBT
  • Mechanical data

    • Dimension Ø 12 x 60 mm
    • Installation quasi-flush
    • Tightening torque 10 Nm
  • Range/Distance

    • Assured operating distance Sa 6.1 mm
    • Hysteresis H max. (% of Sr) 20 %
    • Rated operating distance Sn 8 mm
    • Real switching distance sr 8 mm
    • Repeat accuracy max. (% of Sr) 10 %
    • Switching distance marking ■■■■
    • Temperature drift max. (% of Sr) 10 %
    • Tolerance Sr ±10 %

Inductive Sensors

BES M12MG1-PSC80B-S04G Order Code: BES05KH
Remarks

The sensor is functional again after the overload has been eliminated.
Quasi-flushed: See installation instructions for inductive sensors with extended range 825356.
For more information about MTTF and B10d see MTTF / B10d Certificate
Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with no warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way.

BALLUFF BES05KH Inductive Standard Sensorsfig3

www.balluff.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals