SCX Design E20.30L Bluetooth Headphones Instruction Manual
- June 6, 2024
- SCX Design
Table of Contents
Instructions manual
Bluetooth Headphones E20.30L
Product specifications :
Size : 20cm x 17,5cm x 4 cm
Weight : 190 g
Material: ABS/PU – Rubber with antibacterial treatment
FM radio function
Charging time: 2 hours
working time: 5 hours
Wireless maximum distance: 10 m
1. Operation instruction for Bluetooth mode
ON/OFF
- Long press the ON/OFF button for 3 seconds.
- The blue light will turn on while Bluetooth entered into pairing mode.
- On the mobile device, turn on the Bluetooth connection.
- Select “E20” in the available Wireless devices on your mobile device.
- To turn off the headphones, long press the ON/OFF button for 3 seconds. (in case the battery voltage is too low, the red light will flicker and the headphones will shut down).
PLAY/PAUSE
When the Bluetooth headphones are connected to the mobile’s stereo, press
shortly on the ON/OFF button in order to pause the music. Shortly press on the
ON/OFF button in order to play the music again.
NEXT/VOLUME UP
When the MP3 is on, short press on the « + » button in order to listen to the
next song. Long press on the « + » will turn the volume up.
BACK/VOLUME DOWN
When the MP3 is on, short press on the « – » button in order to listen to the
previous song. Long press on the « – » will turn the volume down.
ANSWER/HANG-UP/REDIAL
Press on the CALL button in order to take the call. Press again on the CALL
button in order to hang up. While in Bluetooth mode, pressing twice the CALL
button will dial the last number. If taking a call while listening to music,
the music will be paused automatically and will be resumed after ending the
call.
- Operation instructions on MP3 mode – In « Power-on », insert the TF card, MP3 will play automatically (blue light will flicker slowly). – In « Bluetooth mode », short press on the FM/MP3 button in order to switch to MP3 mode.
- Operation instructions for FM radio Long press on the FM/MP3 button to switch to the radio. Please perform « auto search » before listening to the radio by a short pressing on the ON/OFF button.
- Insert the « aux cable » to the headphones interface in order to listen to music when the headphones are in the OFF position.
- Charging Before using the headphones for the first time, please make sure you charge the Headphoneq fully using the charging cable.
- Package content
1 Wireless headphone
1 USB charging cable
1 aux cable
1 user manual
1 Polyester transport pouch
Warning! Adjust the sound of this headset with a suitable volume
To avoid possible hearing damage, do not listen to high volume for a long
time. Never use these headphones when traveling on a bicycle, motorcycle or
another motorized vehicle. When using this headset outdoors, make sure that
the sound does not prevent you from hearing the external sounds and does not
put you in danger.
Keep the product dry; do not place the product in damp places.
Keep out of direct sunlight and high temperatures High temperatures may result
in damage.
Keep out of cold temperatures, this will help avoid internal damage.
Do not disassemble the product.
Avoid dropping the headphones.
Do not continue to charge the headphones over 5 hours.
This product complies with European Directive 2002/96 / EC on waste electronic
and electronic equipment (WEEE) and 2011/65 / EU & 2015/863/EU on the use of
certain hazardous substances in electrical and electronic equipment (RoHS).
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver
. — Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Importé par SCX Design
74 avenue de Villiers 75017 Paris – France