SCX Design O18/32507 4000mAh Wireless Power Bank Notebook Instruction Manual
- June 12, 2024
- SCX Design
Table of Contents
SCX Design O18/32507 4000mAh Wireless Power Bank Notebook
Notebook power bank
Reference 018/32507 – Wireless Power Bank Notebook 4000 mAh
Please read the instruction manual carefully before using the product.
Product Specification
- Pages: 30
- Wireless: SW
- Input: SY /l.85A
- Output: 5V 1A/2A
- Main material: PU
The notebook is detachable Integrated rPET cables (made from recycled
bottles).
The notebook cover includes a 3 in l cable (iPhone. Android. Type C). and a
USB charging port for the powerbank.
Power-up “Shake” with logo that lights up (the battery can stay with the logo lit non-stop for 20 days without being recharged).
Key functions
Functionalities
- LED indicator displays the remaining power.
- Shake the product to see the remaining power of the product.
LED Light (ON & OFF)| Capacity
---|---
| 100%-75%
| 75%-50%
| 50%-25%
| 25%-0%
| 0% - The power bank allows to fully charge an iPhone, an Android device or any other ordinary mobile phone per charge.
- You can charge your wireless compatible smartphone on the fold-out inner part by placing it on the wireless symbol :
Warning!
Due to system updates of your smartphone the included cable might not work any
longer. In this case we recommend the usage of the original cable.
Do not place or use this product near a source of high heat or in a humid
environment.
Keep the product out of reach of children.
If the chargers are not used for a long period, please charge / unload
it once every 3 months to preserve the functionality of the product.
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Designed by SCX design 44 rue de la Jonquière 75017 PParis – France
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>