Scx Design O21 Rechargeable Charging Mouse Instruction Manual

June 5, 2024
SCX Design

Scx Design O21 Rechargeable Charging Mouse

Rechargeable charging mouse + 10W wireless charging base O21 / KOOZIE

Please read the instructions carefully before using the product.

Product specification

  1. Mouse with lighting logo
    Material: ABS with soft-touch surface
    Battery type: polymer
    Input / output USB: 3.7V–4.2V – 25mA
    Product dimensions: 110 x 70 x 28 mm
    Weight: 100 g
    Battery: 0.074W/h -400 mAh
    Time to charge battery fully: 3 hours
    Wireless range: 8-12 meters

  2. Wireless charging base
    Input: 5V-2A/9V-2A
    Output: 5V-1A/9V-1.2A/10W
    Dimensions: 100 x 60 mm
    Weight: 50 g

Functionality

When the mouse battery is 100% charged the logo is very bright. When the charge descends below 20%, the lighting logo darkens.
After use, put the wireless mouse on top of the wireless base to recharge it. When the mouse is charging, the logo lights up.
The product includes a 1-metre USB charging cable. When the mouse has no battery left, it can be used while charging with the cable.
When the battery is 100% charged, the battery life of the wireless mouse is 8 hours in constant use. The battery life may vary depending on usage and computer conditions. The multiple protection system for security ensures the safety of the device: protection from overload, overvoltage, overcurrent and short circuit.

To recharge your product: plug in the supplied cable at the front of the mouse. Once it is completely charged unplug the cable.

**Warning!**

  • Do not expose to dust, sunlight, excessive humidity, excessive temperature or mechanical shock.
  • Do not use if the equipment is damaged.
  • Keep the product out of the reach of children.
  • Do not try to disassemble or repair the product.
  • For security reasons, our products are delivered 50% charged for optimal use.

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference receive d, including interference that may cause undesired operation.
FCC WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection again st harmful interference in a residential installation.

This equipment generates, uses and can radiate radi o frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inerference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cau se harmful interference to radio or television reception, which can be determi ned by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measur es:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet different fro m that to which the receiver is connected
  • Consult the dealer or an experienced radio/TV tech nician for help.

Caution:

To comply with the limits for an FCC Class B comput ing device, always use the shielded signal cord supplied with this unit.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

SCX Design User Manuals

Related Manuals