cheero TouchBone Bone Conduction Headphones User Manual
- June 5, 2024
- cheero TouchBone
Table of Contents
USER MANUAL
cheers TouchBone Bone Conduction Headphones
1V1.0
What is Bone conduction
Bone conduction technology delivers sound through your cheekbones, ensuring your ears remain completely open to ambient sounds for maximum situational awareness during long-term wear.
Package Contents
Bone Conduction Headphones, Noise-reducing Earplugs, User Manual, USB Charging (USB in Micro).
Wearing Method
As shown, hand the earphones behind your neck while the speaker is attached to the cheekbones in front of your ears, rather than on your ears.
Product Instruction
Power On
Long press MTB for 2 seconds, cheers TouchBone will turn on when the LED
indicator shows blue light for 1 second, and the voice prompt ‘power on” can
be heard.
Bluetooth Connection
1. Bluetooth Pairing
If it is the first time that your cellphone or another Bluetooth device
connects with cheers TouchBone, then long-press the MTB for 4 seconds, cheers
TouchBone enters into Pairing Mode, and the red and blue lights flash at the
same time, with the voice prompt “pairing” can be heard.
2. Bluetooth Connection
Open the Bluetooth in your cellphone and enter into Bluetooth Searching Mode,
when “cheers TouchBone” appears in the BT list then just click it. The
connection is successful when the BLUE blinks on LED disappear. Once your
cellphone is connected with cheers TouchBone for one time, it will
automatically connect with your cellphone next time.
Note: The Bluetooth work range supports up to 10 meters, so if cheers
TouchBone is away from 10 meters with your cellphone, it will disconnect.
cheers TouchBone will automatically re-connect with the cellphone if it gets
back into the connection range within 5 minutes. And, cheers TouchBone will
automatically turn off if it disconnects from your phone in more than 5
minutes.
3. Multipoint Connection
cheero TouchBone can simultaneously connect with two cellphones at most. (1)
Follow the above method to connect cellphone A successfully, then turn off the
Bluetooth mode of cellphone A. e Turn on Bluetooth on cellphone B , when
‘cheers TouchBone” appears in the Bluetooth list of your cellphone B, then
click it, well, the cellphone B will connect with cheers TouchBone
successfully. 4
3. Turn on the Bluetooth of Cellphone A again, and Cellphone A automatically
connects with cheers TouchBone. Thus, your cheers TouchBone simultaneously and
successfully connects with two cellphones.
Play/Pause Music
-
Play Music
Open one music app then choose one music to play, cheers TouchBone will automatically play. Note: If your cheers TouchBone concurrently connects with two cellphones, cheers TouchBone can play music for only one device, and priority depends on the Bluetooth function of the phone and the music app. -
Pause Music
Single press MTB once, it will pause music. -
Volume Control
Single press Vol+/Vol- to increase/decrease the volume. If the volume turns up to maximum or minimum, there will appear a prompt tone “Dr. -
Switch Music
Long press Vol+, Nol- to switch tc the previous/next song.
Bluetooth Phone Call
-
Answer/End Incoming Call
When receiving an incoming call, there will have a ringtone in your cheer TouchBone. Short press the MTB, the call will be got through. After answering the call, then short press the MTB again, the call will be hung up.
Note: If your cheer I ouchl3one concurrently connects with two cellphones, there is no priority, and cheer TouchBone will automatically respond to the one which has a phone call coming in. -
Reject the Incoming Call
If you want to reject the incoming call, long-press the MTB for 1-2 seconds, the call will be hung up. -
Redial the Phone number
If you want to make a phone call, then double press the MTB, cheers TouchBone will automatically redial the last dialed number in the call records listing of your phone. Note: If your cheers TouchBone simultaneously connects with two cellphones, it will automatically redial the last dialed number of the first paired phone.
Factory Reset
When cheers Touch Bone is on, simultaneously long-press Vol + and Vol – for 4
seconds, it will come to Factory Reset mode.
Wake up Phone Voice Assistant
In the Standby mode, long-press the MTB for almost 1 second, it will wake up
the Voice Assistant of the first paired phone(if your cheero TouchBone has
simultaneously connected with two cellphones).
Low Battery Notice
When the power is too low, your cheers TouchBone will enter into low battery
notice mode, the LED shows red and the voice prompt “Low Battery, Please
Charge” can be heard every 1 minute. After the voice prompt is played for 5
times, your cheers TouchBone will automatically turn off.
Power Off
Long press MTB for 3 seconds, cheers TouchBone will turn off after the LED
indicator shows red for 1 second and the voice prompt “power off” can be
heard.
Charging
Insert SV Micro USB cable into the charging port and wait for 3 seconds,
cheers that TouchBone is charging when the LED shows solid red light; when the
LED turns solid blue light, charging is completed.
Multifunction Button
| Power on | Long press the MTB for 2 seconds |
|---|---|
| Power off | Long press MTB for 3 seconds |
| Play/Pause Music | Single press the MTB for one time |
| Volume Control | Single press Vol+ or Vol- |
| Switch Music | Long press Vol+ or Vol- |
| Factory Reset | Simultaneously long-press Vol+ and Vol- for 4 seconds |
| Answer/End Incoming Call | Single press the MTB |
| Reject the Incoming Call | Long press the MTB for 1-2 seconds |
| Reject the Incoming Call | Double press the MTB |
Multifunction Analysis
| Multifunction | Possible Cause | Solution |
|---|---|---|
| Unable to turn on | The battery power is too low | Please charge in time |
| Unable to connect | Out of the connection range | Please move the cheers |
TouchBone and the phone that needs to connect with within 10 meters.
(Sometimes it also depends on the Bluetooth function of your phone, please
check-in.)
No sound in the call| Bluetooth Connection failed / Bluetooth Phone Call mode
hasn’t been turned up.| Re-connect the phone/ Turn up the Bluetooth Call Mode
of your phone.
Specifications
| Brand Model Number | cheers TouchBone |
|---|---|
| Weight | 34g |
| Physical Dimension | 13710249mm(reference) |
| Appearance Color | Black/White |
| CPU | Qualcomm 3003 |
| Bluetooth Version | 5.0 |
| Bluetooth Protocol Bluetooth Work Range | A2DP/AVRCP/EDR/HFP/HSP 10M(33 feet) |
| Working Frequency | 2402MHz-2480MHz |
| Transmit Power | Class2(-6dbm—s4 dbm) |
| Microphone Speaker | Bone Conducting Speaker 300Mw*2 |
| Sound Frequency | 20Hz-20KHz |
| Battery Capacity | 150mAh, Lithium |
| Working Time. | 5 hours |
| Waterproof Grade | IPX5, Sweatproof |
| Charge Port | Micro USB |
Storage and Maintenance
- Store your headphones in a cool, dry place. Operating temperature -10-45°C (14-113°F). Working in a cold/hot environment or in a highly humid place can reduce battery life. After storing it for a long time, please charge it before use.
- This BT headset is water-resistant, but not completely waterproof. It can’t be placed in water for a long time and cannot be used for diving. If there is water, wipe it off with a clean soft cloth.
- Clean the headphones with a soft, dry cloth.
- Keep the headphones away from any sharp objects.
- Do not place the headphones in a very high or low-temperature environment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>