O30.30L SCX Design 5W Wireless Charging LED Desk Lamp Instruction Manual
- June 3, 2024
- SCX Design
Table of Contents
O30.30L SCX Design
5W Wireless Charging LED Desk Lamp
Instruction Manual
O30.30L SCX Design 5W Wireless Charging LED Desk Lamp
SCX Design® 5W Wireless Charging LED Desk Lamp
Reference O30.30L/32501
Please read this intruction manual carefully before using the product.
Product specifications
- Materials: ABS + aluminium
- Input (max): 5V/3A
- Wireless output: 5W
- USB output: 5V/1A
- Lamp power (Max 4W, 5V/0.8A)
- Brightness: 250 Lumen
- LED: 52 LEDs SMD2835
- Includes a Type-C charging cable
Main functions
-
Switching on and wireless charging
Connect the lamp using the supplied power cable. Press the power button to turn on the lamp. The surface in the middle of the base is a 5W wireless charging base. If your smartphone is compatible with induction technology, place it horizontally on the base and your smartphone screen will light up. -
Light adjustment
You can adjust the brightness as well as the shade of the light using the various touch indicators. Slide your finger to the right to increase the brightness, to the left to decrease it.
To change the shade, press the M symbol to select the desired shade.
Warning!
– Do not place this product on a slippery surface.
– Do not use this product near a heat source or in a humid environment.
– Keep the product out of the reach of children.
– Do not try to disassemble or repair the product.
– LEDs are not replaceable.
FCC Compliance Statements :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Caution : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Never Store or use this product in temperatures below 32°F (0°C) or above
115°F (45°C).
SAFETY WARNING
In order to prevent conditions. that can lead to overheating,please make sure
that the wireless charging pad surface is free of all metal objects at all
times, such as coins or paper clips. In addition, before charging, please
remove anything metallic attached to the back of the phone, such as battery
cases,ring holders, or plates used for .mounting to magnetic phone holders.
**** Designed by SCX design
44 rue de la Jonquiere
75017 Paris – France
IMPORTER FOR USA AND CANADA
Distributed by Koozie Group
14421 Myerlake Circle
Clearwater, FL 33760
USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>