1Mii B0305 Wireless Flight Audio Adapter User Guide
- June 5, 2024
- 1Mii
Table of Contents
1Mii B0305 Wireless Flight Audio Adapter
Product Specifications
The B05 is a high-end audio Bluetooth transmitter with apex low-latency, aptx HD function. It can transmit the audio played in the aircraft compartment to your Bluetooth headset via Bluetooth, free from the shackles of the cable, allowing you to use the Bluetooth Headphones enjoy movies, music during flight journey
- Audio codec: aptX, aptX-HD, aptX-LL, SBC
- Operational range: indoors: up to 100ft (without obstacles) outdoors: up to 164 ft (without obstacles)
- Input voltage/ current: Micro USB DC5V 500mA
- Operating temperature:-10°C ~ 45°C
- Storage temperature: -20°C ~ 60°C
- Product size: 90×50×32mm
- Product weight: 80g
- Package Contents
- B05 wireless flight audio adapter
- Charging box
- USB charging cable
- User manual
Product Overview & Control Functions
Wireless Audio Adapter
| Button| Operating| Function| Led Indicator Status
---|---|---|---|---
| Short press| Power On/
Reconnection
| Flashes Blue
Once Per 2s
Press And Hold
For 2s
| Pairing| Flashes Red And Blue Alternately
Press And Hold
For 5s
| Power Off| Solid Red 2s Then Turn Off
| Connected 1 Device| Flashes Blue
Once Per 5s
| Connected 2 Devices| Flashes Purple
Once Per 5s
Connected Then
Short Press
| AptX-HD Codec Mode| Solid Green 2s Then
Flashes Per 5s
| Aptx-LL Or Other Codec Mode| Flashes Blue Once Per 5s
| Charging| Solid Red
| Low Battery| Flashes Red Once 1.5s
Press And Hold For 10s| Clear Paired History Then Enter Pairing Mode
Automatically| Solid Purple 1s Then Flashes Red And Blue Alternately
Charging Box| | |
Battery Indicators
| 4 Led Indication
25-50-75-100% Battery Capacity
Installationsschema
Pair 1Mii B05 with your Bluetooth headsets
- 1Mii B05 pairing mode — status LED flash blue / red alternately fast.
- First time use: take out the transmitter from the charge dock, 1Mii B05 auto enter pairing mode (with clear memory).
- Afterward: press Multifunction button for 2 seconds to enter.
- Set your Bluetooth headsets to pairing mode refer to its user manual.
- Wait and connected.
- after B05 connected with your Bluetooth headsets, plug the B05 into airplane audio port, enjoy the music, movies… (For quick pairing, better keep them within 1 meter when pairing).
Restore Factory Default Settings
You may need to reset B05 if it is not working as expected. When B05 is reset
to factory default settings, all the paired device information will be
cleared.
Hold the buttons 10s the Red and blue lights are always on for 2 seconds.
Troubleshooting
- I am having trouble pairing and connecting to my Bluetooth device. Please check the following:
- Your wireless device supports the wireless profiles listed in the specifications.
- B05 and your device are next to each other or within 3 feet / 1 meter.
- Make sure both B05 and the wireless device are in pairing mode.
- After connecting and pairing with my wireless device, I cannot hear any music from my sound system.
- Make sure you audio device is not muted.
Warnings
Warranty service is limited to normal use. Any man-made damages arising from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs and adjustments not approved by the company, damages from misuse, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.
Disposal
Always dispose of the used appliance at a recycling center. Do not dispose the used appliance with household waste.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- his device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.