MEEC TOOLS 009208 Hand Mower Instruction Manual

009208 Hand Mower
Instruction Manual

HAND MOWER
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions).
Jula reserves the right to make changes. For the latest version of operating instructions, see www.jula.com

SAFETY INSTRUCTIONS

• Carefully read these instructions before use, and follow all the instructions and safety instructions to avoid personal injury and/or material damage. Save these instructions for future reference. These instructions should be enclosed with the product if it is sold or passed on. The manufacturer cannot accept liability for any damage resulting from failure to follow these instructions.
• Failure to follow all the instructions and safety instructions can result in the risk of serious personal injury. Save these instructions and safety instructions for future reference.
• Read all the instructions carefully before use, to minimize the risk of personal injury.
• Keep onlookers, especially children, and pets at a safe distance.

WARNING

• The blades are sharp — the risk of cut injuries. Wear safety gloves when assembling and/or for maintenance.
• Keep your hands and feet away from the openings when the product is in use.

SYMBOLS

TECHNICAL DATA

Working width………………………40 cm
Mowing height………………………….15-35 mm
Weight…………………………………… 7.5 kg

DESCRIPTION

1. Wheel
2. Blade
3. Mower drum
4. Grass catcher
5. Strap
6. Handle, the top part| 7 Handle, top tube (2)
8. Handle, bottom tube (2)
9. Screw M6 x 30 (4)
10. Screw M6 x 25 (4)
11. Nut M6
FIG. 1
FIG. 2
---|---

ASSEMBLY

WARNING!
Wear safety gloves when assembling and/or for maintenance.

1. Screw the top part of the handle (6) on the two handle tubes (7) with two screws M6 x 25 (10) and two nuts.
   FIG. 3

2. Screw the bottom tube on the handle (8) on the two top tubes (7) with four screws M6 x 30 (9), two M6 x 25 (10), and nuts (11).
   FIG. 4

3. First, fit one side of the handle on the product, press the handle together a little, and then fit the other side.
   FIG. 5

FITTING THE GRASS CATCHER

1. Press the frame into the tubes on the grass catcher. FIG. 6
2. Snap the side attachments on the catcher over the frame. FIG. 7
3. Snap the bottom attachments on the catcher over the frame. FIG. 8
4. Fit the grass collector on the drum.
5. The grass catcher must also be fastened to the handle with the supplied straps.

USE

INTENDED USE

• The product is intended for cutting grass.
• The product is only intended for household use, not for commercial use.

HOW TO USE

• The lawnmower can cut grass up to 10 cm high.
  Mow the lawn regularly—the grass will grow faster and become thicker and more resistant if it is kept short unless the climate is very dry.

• Mow the lawn with a relatively high mowing height first, and then gradually reduce the height. A mowing height of about 2.5 cm gives the lawn a well-mown look.

• Only cut the grass when it is relatively dry.

• Mow in a straight line with an overlap of a few centimeters for best results.

Adjusting the mowing height The lawnmower has four mowing heights, from 15 to 35 mm. Adjust the mowing height by pulling out the spring-loaded pins (A) on both sides and moving them to the required positions. FIG. 9

MAINTENANCE

Follow the maintenance instructions for the best functionality and useful life.

• Clean the product with a brush or cloth after use.
• Check that all screw unions are properly tightened at regular intervals.
• Replace damaged or worn parts immediately. Clean and lubricate all the screw unions and moving parts, such as the wheels and axles, at regular intervals for the best functionality and life span.
• The blade drum is subjected to heavy wear. Check at regular intervals the condition of the blade and that the blade drum is firmly in place. Contact the retailer if the blade is blunt and needs to be replaced. Only use spare parts recommended by the manufacturer.

ADJUSTING THE FIXED BLADE

WARNING!
Wear safety gloves. Undo the adjust nuts (10 mm) on each side and adjust the fixed blade to the required position. The blade is correctly adjusted if a sheet of paper is placed between the drum and the blade is cut by turning the wheels forward by hand.
NOTE
The blade should only be adjusted before using it for the first time and when the blade is worn.

STORAGE AND TRANSPORT

Storage

• Store the product and accessories in the original pack, in a dark, dry, frost-free place, out of the reach of children. The recommended storage temperature is from S to 30°C.
• Store the product in a dry place out of the reach of children. Remove the grass catcher and put the handle vertical to save space.

Transport

• Carry the product by the handle. Never put your hands or other parts of the body in the cutting mechanism.
• Fit transport protection where appropriate.
• Protect the product from damage and heavy vibrations, especially when transported in a vehicle.
• Secure the product so that it cannot move or tip over.

TROUBLESHOOTING

blade.
 Blunt blade.| Have the blade sharpened or replaced?

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>