TPP Pipettor Turbo-Fix Device User Guide
- June 5, 2024
- TPP
Table of Contents
TPP Pipettor Turbo-Fix
Quick Start Guide
**** This quick guide is intended to provide a brief overview of the main features and operation of TPP Pipettor Turbo-Fix. For detailed information, please refer to the latest Operating Instructions that can be found at www.tpp.ch in several languages.
Battery Charge
Charge the battery completely before first use.
Only use the original Li-ion battery for TPP Pipettor Turbo-Fix!
The supply voltage must meet the requirements of the mains adapter: 100-240
VAC, 50/60 Hz.
Plug in
| Low Battery | Charging Battery | Charged Battery |
|---|---|---|
General Speed Setting
Manual Speed Control
Filter Exchange
| Press (1) and turn 1/8th counter clockwise (2) | Replace the filter |
|---|
| 
GENERAL INFORMATION
Intended Use
TPP Pipettor Turbo-Fix is a pipette controller designed for aspirating and
dispensing aqueous solutions with plastic or glass pipettes in a volume range
of 1 to 100 ml. It is intended for measurement, control and laboratory use.
Any use of this instrument in a medical or IVD setting is the responsibility
of the user.
Safety Notes
-
Do not use or charge TPP Pipettor Turbo-Fix in an atmosphere with danger of explosion.
Do not pipette highly flammable liquids such as acetone or ether. -
Comply with the material safety data sheet (MSDS) and with all safety guidelines when handling dangerous substances. Use protective clothing and safety goggles. Never point a pipette in anyone’s direction.
-
Avoid pipetting of liquids whose vapours could attack the materials PA (polyamide), POM (polyoxymethylene), FPM (fluor-rubber), NBR (nitrile-rubber), CR (chloroprene) and silicone.
Corrosive vapours could also damage metallic parts inside the device. -
Use an original TPP mains adapter only. Protect it from moisture otherwise TPP Pipettor TurboFix might be damaged.
Regardless of the listed safety notes, additionally applicable regulations and guidelines of trade associations, health authorities, trade supervisory offices, etc. must be observed.
Warranty
TPP Pipettor Turbo-Fix is designed and manufactured following high standards
in quality and durability. It is warranted for a period of 12 months.
Equipment Disposal
TPP Pipettor Turbo-Fix device must not be disposed of with unsorted municipal
waste.
Dispose of TPP Pipettor Turbo-Fix and the battery separately in accordance
with the laws and regulations in your area governing disposal of devices.
Supplier
TPP Techno Plastic Products AG
CH-8219 Trasadingen, Switzerland
T +41 52 687 01 87
F +41 52 687 01 77
info@tpp.ch
www.tpp.ch
Declaration of conformity
TPP Techno Plastic Products AG – 8219 Trasadingen, CH declares on its own
responsibility that the devices
| Description | Models |
|---|---|
| TPP Pipettor Turbo-Fix | 94700, 94701, 94702, 94703 |
comply with:
EU Directives and Regulations
2014/35/EU, 2014/30/EU, 2012/19/EC, 2011/65/EC, 2006/66/EC, 1907/2006,
2019/1782,1103/2010
GBR Regulations
S.I. 2016/1101, S.I. 2016/1091, S.I. 2013/3113, S.I. 2012/3032
Trasadingen, January 14, 2021
For detailed CE declaration with regulations of other countries, please refer to the operating instructions.
155922_V06_QSG_TPP_Pipettor.doc