TPP 99722 Syringe Filter Instruction Manual

June 16, 2024
TPP

99722 Syringe Filter
Instruction Manual

Instructions for Use in Pictures TPP Syringe Filter

Do not re-sterilize or reuse the TPP syringe filter. For single use only.

Measurements 99722 99745
Inlet to outlet mm 27 27
Diameter mm 33 33
Filter size cm² 4.52 4.52
Pore size μm 0.22 0.45
Max. using temp °C 45 45
Flow rate water 25 °C / 2 bar ≥ 150 mL/min ≥ 180 mL/min
Burst pressure at 25 °C 10 bar 10 bar
Filtration volume mL 10 – 200 10 – 200
Dead volume following further flushing with air mL 0.1 0.1
Connection In-let Luer-lock Luer-lock
Connection out-let Luer-conus Luer-conus

Source: TPP
Note: TPP products are for research use only and are not intended for use in clinical, diagnostic or therapeutic procedures. TPP assumes no responsibility for damages or defects resulting from unapproved or improper use.
TPP recommendations are guidelines and do not represent absolute values. TPP assumes no responsibility for the currency, accuracy, completeness, or quality of this TechDoc.

TPP Techno Plastic Products AG
Zollstrasse 7, CH-8219 Trasadingen, Switzerland
Tel. +41 (0)52 687 01 87, Fax +41 (0)52 687 01 77
info@tpp.ch, www.tpp.ch

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals