SANUS BSF316 19 Inch Premium Full Motion TV Wall Mount Instruction Manual

SANUS BSF316 19 Inch Premium Full Motion TV Wall Mount

Product Specifications:

• TV Weight Limit (including accessories): 35 lbs. (15.8 kg)
• Wall Construction: Wood studs, solid concrete, or concrete block
• Tools Needed:
  • Tape Measure
  • Pencil
  • Level
  • Tape
  • Screwdriver
  • Electric Drill
  • 7/16 in. (11 mm) Socket Wrench
  • Stud Finder (for wood stud install)
  • Awl
  • 1/8 in. (3 mm) Wood Drill Bit
  • 3/8 in. (10 mm) Concrete Drill Bit
  • Hammer
• Dimensions:
  • 79.17 x 7.87 x 2.95 inches [200.0 x 75.0 x 75.0 mm]
  • 7.87 x 2.95 x 3.94 inches [200.0 x 75.0 x 100.0 mm]
  • 9.76 x 3.94 x 8.66 inches [248.0 x 100.0 x 220.0 mm]
  • 0.39 x 0.34 x 4.51 inches [10.0 x 8.6 x 114.5 mm]
  • 5.30 x 0.39 x 2.30 inches [134.5 x 9.8 x 58.5 mm]

Product Usage Instructions

Checking TV Compatibility:
Ensure that your TV weight (including accessories) does not exceed 35 lbs. If it exceeds this weight, this mount is not compatible.

Wall Type Check:
Only install the product on wood studs, solid concrete, or concrete block walls. Avoid installing in drywall alone as it will not support the weight of your TV.

Tools Preparation:
Gather the necessary tools listed in the specifications section including a tape measure, pencil, level, screwdriver, electric drill, socket wrench, stud finder (for wood stud install), drill bits, and a hammer.

Installation Process:
Follow the step-by-step instructions provided in the manual for a smooth installation process. Use HeightFinderTM to determine the drilling location accurately.

Safety Precautions:
Double-check all measurements, ensure the wall can support five times the weight of the TV and mount combined, and do not exceed the weight limit specified by the manufacturer.

Frequently Asked Questions (FAQ):

1. Q: Can I install this product on drywall alone?
   A: No, this product is designed to be installed only into wood studs, solid concrete, or concrete block walls.
   Drywall alone will not hold the weight of your TV.

2. Q: What do I do if my TV weight exceeds the specified limit?
   A: If your TV weight (including accessories) exceeds 35 lbs., this mount is not compatible. Contact customer service for assistance in finding a suitable mount for your TV.

WE’RE HERE TO HELP

• Want to watch a video that shows how easy this DIY project will be?
• Get it right the first time. HeightFinder™ shows you where to drill.
• Our US-based install experts are standing by to help.

Watch it now at: SANUS.com/2781
Check it out at: SANUS.com/1172
Call us at: 800-359-5520
Or, chat at: SANUS.com/chatSP

IMPORTANT SAFETY INSTRUCTIONS – PLEASE READ MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service 1-800-359-5520.
CAUTION: Avoid potential personal injuries and property damage!

• This product is designed ONLY to be installed into wood studs, solid concrete or concrete block.
  • DO NOT INSTALL INTO DRYWALL ALONE — DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV.
• This product is designed for INDOOR USE ONLY.
• The wall must be capable of supporting five times the weight of the TV and mount combined.
• Do not use this product for any purpose not explicitly specified by manufacturer.
• Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.

TV Weight Limit
(including accessories)
DO NOT EXCEED

If your TV (including accessories) exceeds this weight, this mount is NOT compatible.
Visit SANUS.com or call customer service to find a compatible mount.
1-800-359-5520

Wall Construction
ONLY install on these acceptable wall types.
Unsure

Call Customer Service
1-800-359-5520

CAUTION:
DO NOT install in drywall alone
Drywall alone will NOT hold the weight of your TV.

Tools Needed

Dimensions in [mm]

BEFORE YOU BEGIN

Remove the stand from your TV — if attached.

Install any accessories
you may have purchased, if they require TV removal prior to assembly. The TV is removable for future accessory purchases.

Protect the face of your TV when laying it down for installation.

Supplied Parts and Hardware

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.

Parts and Hardware for STEP 1

Parts and Hardware for STEP 2

Parts and Hardware for STEP 3

STEP 1 Attach TV Bracket to TV

Select TV Screw Diameter
Only one screw size fits your TV.

NOTE: If your TV included inset spacers or adapters, use them UNDER the mount hardware.

Select TV Screw Length and Spacers
A NO SPACER

• Flat Back TV

[TV brackets lay flat on your TV]

B SPACER NEEDED

• Flat Back TV with extra space needed
  [for deep inset holes or cable interference]

• Rounded or Irregular Back TV
  [TV brackets NOT resting flat on your TV]

CAUTION: Verify adequate thread engagement with your screw 01 , washer 02 , spacer 03 combination AND TV bracket 04 .

• Too short will not hold your TV.
• Too long will damage your TV.

Attach TV Brackets to Your TV

Center TV bracket 04 over your TV hole pattern as shown. Various hole positions included for non-centered TV hole patterns.

Install using the screw 01 / washer 02 / spacer 03 combination you selected for your TV.

STEP 2A Attach Wall Plate Wood Stud Installation

CAUTION: Avoid potential personal injury or property damage!

• Drywall covering the wall must not exceed 5/8 in. (1.5 cm)
• Minimum wood stud size: nominal 2 x 4 in. (5.1 x 10.2 cm) actual 1 ½ x 3 ½ in. (3.8 x 8.9 cm)
• Stud center must be verified

STEP 2B Attach Wall Plate Solid Concrete or Concrete Block Installation
CAUTION: Avoid potential personal injury or property damage!

• Mount the arm assembly 06 directly onto the concrete surface (no surface covering)
• Minimum solid concrete thickness: 8 in. (20.3 cm)
• Minimum concrete block size: 8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm)

STEP 3 Hang TV onto Wall Plate

Hang the TV onto the arm assembly 06 by hooking the top support on TV bracket 04 as shown.

CAUTION: Avoid potential personal injury or property damage!
Always make sure your securement screw 10 is tightened, so the TV is securely fastened to the arm assembly 06 .
To lock the TV onto arm assembly 06 , install the securement screw 10 on the TV bracket 04 .

Manage Cables

1. Remove the cable covers C from the arm 06 by sliding to unlock. Route the cables along the arm.
2. Reattach cable covers C to capture the cables.

TV Adjustments

1. Loosen screw 10 .
   CAUTION: Screw 10
   MUST be loosened before STEP 2.

2. Level your TV with screw L .

3. Tighten screw 10 .

TILT ADJUSTMENT
Your TV should adjust easily when moved, then stay in place.
Adjust the tilt tension knobs T if your TV naturally tilts up or down.
NOTE: If you do not intend to adjust the tilt for different viewing locations, you can tighten the tilt tension knobs T , to prevent unwanted movement. If needed, use hex key to tighten more firmly.

REMOVE THE TV HEAVY! You may need assistance with this step.

Thank you for choosing SANUS Elite!
If you ever have questions about your SANUS product, give us a call. We’re ready to help!
800-359-5520
Email: info@legrand.com
SANUS.com
Legrand AV Inc. and its affiliated corporations and subsidiaries (collectively, “Legrand”), intend to make this manual accurate and complete. However, Legrand makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Legrand makes no representation of warranty, expressed or implied, regarding the information contained herein. Legrand assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
©2020 Legrand AV Inc. All rights reserved. SANUS is a division of Legrand. SANUS and the SANUS logo are registered trademarks.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
Legrand AV Inc. • 6436 City West Parkway • Eden Prairie, MN 55344 USA

References

• SANUS | #1 Brand of TV Wall Mounts in the U.S.
• HeightFinder | SANUS
• SANUS | #1 Brand of TV Wall Mounts in the U.S.
• HeightFinder | SANUS
• HeightFinder | SANUS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>