LA CROSSE TECHNOLOGY TX146 Temperature Sensor Instruction Manual
- June 5, 2024
- LA CROSSE TECHNOLOGY
Table of Contents
**
**
LA CROSSE TECHNOLOGY TX146 Temperature Sensor
POWER UP
Insert 2-AA batteries into the back of your Outdoor Sensor.
Note:
Use the channel selector to set your sensor on channel 1, 2, or 3
Power up as a Replacement Sensor
Refer to the owner’s manual for your clock or weather station to see if you
can Search for Sensor. If so, enable a search and press the TX button
(transmission) on your sensor.
If there is no Search option, try this:
- Bring your sensor inside next to the station and remove batteries from both devices.
- Press any button at least 20 times, and then wait 15 minutes.
- After the wait, install fresh batteries into both your sensor and station. Your outdoor temperature should return within the next few minutes.
- Keep your sensor next to the station for another 15 minutes to establish a strong connection.
- Once connection is reestablished, place sensor outside in a shaded location.
SENSOR MOUNTING
Sensors: Use the provided sensor stands to mount the sensors from the bottom,
back, or top.
- Position vertically to allow condensation to drain out.
Avoid spilling liquids on sensors.
SENSOR DISPLAY
- There is a Channel Selector and TX button inside the sensor battery compartment.
- Press the TX button on to manually send a signal. Hold the TX button to select Fahrenheit or Celsius temperature display on the sensor.
- The boxed number on the bottom indicates the channel selected on the sensor.
- The transmission waves will animate during transmission and be solid when not transmitting.
STAY IN TOUCH
Ask questions, watch setup videos, and provide feedback on our social media
outlets. Follow La Crosse Technology on YouTube, Twitter, Facebook and
Instagram.
WE’RE HERE TO HELP
If you require additional support, get in touch with our friendly customer
support team based in La Crosse, WI. Our associates are available Mon-Fri:
8am-6pm CST.
Phone: 1.608.782.1610
Email: bit.ly/contact_techsupport
SPECIFICATIONS
Sensor (TX146)
Power Requirements: 2 “AA” batteries (not included)
Battery Life: Up to 12 months
Temperature Range: -40ºF to 99ºF (-40ºC to 37ºC)
Transmission Range: 330 feet (100 meters) open air 433 MHz
Dimensions with Stand: 2.11” W x 1.69” D x 5.32” H (5.36cm W x 4.3cm D x
13.52cm H)
BATTERY INSTRUCTIONS
Battery replacement instruction:
When batteries of different brand or type are used together, or new and old
batteries are used together, some batteries may be over-discharged due to a
difference of voltage or capacity. This can result in venting, leakage, and
rupture and may cause personal injury.
- Always purchase the correct size and grade of battery suitable for the intended use.
- Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types.
- Clean the battery contacts and those of the device prior to battery installation.
- Ensure the batteries are installed correctly with regard to polarity (+ and -).
- Remove batteries from product during periods of non-use. Battery leakage can cause corrosion and damage to this product.
- Remove used batteries promptly.
- For recycling and disposal of batteries, and to protect the environment please check the internet or your local phone directory for local recycling centers and / or follow local government regulations.
WARRANTY
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date
of purchase) on this product relating to manufacturing defects in materials &
workmanship.
La Crosse Technology, Ltd,
2830 S. 26th St.
La Crosse, WI 54601
For Full Warranty Details, Visit:
www.lacrossetechnology.com/pages/warranty
CALIFORNIA CUSTOMERS
WARNING:
This product can expose you to chemicals including acrylonitrile, butadiene,
and styrene, which are known to the State of California to cause cancer and
birth defects or other reproductive harm.
For more information, go to:
www.P65Warnings.ca.gov
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. All
rights reserved. This manual may not be reproduced in any form, even in part,
or duplicated or processed using electronic, mechanical or chemical process
without the written permission of the publisher. This booklet may contain
errors or misprints. The information it contains is regularly checked and
corrections are included in subsequent editions. We disclaim any
responsibility for any technical error or printing error, or their
consequences. All trademarks and patents are recognized.
CANADA STATEMENT
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>