NUX Plexi Crunch Reissue Series Clon Marvel Drive Owner’s Manual

Reissue Series
PLEXI CRUNCH
Owner’s Manual

The NUX PLEXI CRUNCH pedal from the Reissue Series offers you high gain distortion tone with the character of the famous hot-rode British valve amps from the golden age of Rock

Overview

• Classic British High Gain Tone
• Analog Circuit with 3 Gain Stages
• FETs Simulate the Characteristic Distortion of Tube Amplifiers
• Active TONE Circuitry
• True-bypass Hardware Switching

Specifications

• Input impedance: 1M Ohms
• Output impedance: 10K Ohms
• Power: 9V battery or external AC adaptor delivering 9V DC regulated minimum 300mA ( )
• Dimensions: 121(L) X 77(W) X 48(D) mm
• Weight: 230g

1. Do not place near heat sources, such a5 realtors, het registers, or appliances which produce heat.
2. Guard against objects or equids entering the incisura.
3. Ruler al sericin qualifed service personnel.
4. Pronged listening at high volume levels may cause smearable hearing loss and/or damage. Aways be sue o practice “asf listening”

Follow all instructions and heed all warnings
KEEP THESE INSTRUCTIONS!

Product Interface

1. POWER Jack
   Use a regulated 9V DC adapter with Negative Tip to power this pedal. It’s highly recommended using the optional NUX ACD-006 Adaptor. Using an incompatible adaptor may cause noise or mal-function.

2. MASTER Knob
   Sets the output level of this pedal.

3. TONE Knob
   Controls the middle frequency. Tur it up to increase the mid, or turn it down to scoop the mid.

4. PREAMP Knob
   Sets the preamp gain. Turn it up will increase the distortion amount.

5. PRESENCE Knob
   Controls the high frequency. Turn it up for brighter tone, or
   turn it down to get a smooth and mellow sound.

6. OUTPUT Jack
   Connect an amplifier into this jack.

7. INPUT Jack
   Connect your guitar into this jack. Plugging in this jack switch on the power whether the effect is engaged or bypassed. When not using this pedal, disconnect the cable from this jack to save battery life.

8. ON/OFF Switch
   Turns On/Off the effect.

Installing The Battery

A battery is supplied with the unit. Connect the snap cord to the battery and insert the battery as shown in the drawing. When the battery runs down the sound will change. In such case please replace with new battery. The power comes on when you insert the plug into the INPUT jack. The use of an AC adaptor is recommended as the unit’s power consumption is relatively high.

Accessories

• 9V battery
• Owner’s manual
• Warranty card

*Specifications and features are subject to change without notice.
WARNING:  IMPORTANT SAFETY INSTRUCTIONS BEFORE CONNECTING, READ INSTRUCTIONS
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: To reduce the risk of fire or electric shock, do not remove screws. No user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning symbol within a triangle means “electrical caution!” It indicates the presence of information about operating voltage and potential risks of electrical shock.
The exclamation point within a triangle means “caution!” Please read the information next to all caution signs.
CE mark for European Harmonized Standards
CE Mark which is attached to our company’s products of Battery mains the product is in fully conformity with the harmonized standard(s) EN 61000-6-3:2007+A1:2011 & EN 61000-6-1:2007 Under the Council Directive 2004/108/EC on Electromagnetic Compatibility.

www.nuxefx.com
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>