CREATE 90w Air Floor Box offwhite industrial style User Manual

June 5, 2024
CREATE

CREATE 90w Air Floor Box offwhite industrial style

CREATE-90w-Air-Floor-Box-offwhite-industrial-style-
product

Thank you for choosing our industrial fan. Before using the appliance, and to ensure the best use, carefully read these instructions
The safety precautions enclosed herein reduce the risk of death, injury and electrical shock when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt and package. If applicable, pass these instructions on to the next owner of the appliance Always follow basic safety precautions and accident-prevention measures when using an electrical appliance. We assume no liability for customer failing to comply with these requirements

SECURITY INSTRUCTIONS

When using any electrical appliance, basic safety precautions should always be observed.

  • The appliance is anty to be used indoors and for the purposes described in these instructions
  • Unauthorized use and technical modifications to the appliance can lead to danger to life and health
  • This appliance can be used by children aged 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved Children shall not piay with the appliance
  • Cleaning and user maintenance shall not be made by children without supervision.
  • Never leave any parts of the packing within the reach of children.
  • This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet for only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician DO NOT attempt ta defeat this safety feature

WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.

  • Never insert objects into the grille of the fan. Do not cover the appliance during operation
  • Always disconnect the power cord from the socket before removing the protection grille.
  • Only connect the cable to alternating current. Observe the voltage information given an appliance
  • Do not use damaged extension cords.
  • Do not run the power cord over sharp edges and make sure that it does not get trapped
  • Do not pull the plug from the socket with wet hands or by holding on to the power cord
  • Do not use the appliance in the Immediate Vicinity of a bathtub, a shower or a swimming pool (observe a minimum distance of 10 ft/3 m). Place the appliance such that a person in the bath tub cannot touch the appliance
  • Do not place the appliance near a heat source. Do not subject the power cord ta direct heat (such as a heated hotplate, open flames, hot iron sole plates ar heaters for example). Pratect power cords from oil.
  • Check that the appliance is properly positioned to ensure high stability during its operstion and make sure that no one can trip over the power cord.
  • The appliance is not splash-proof.
  • Do not store the appliance outdoors
  • Store the appliance in a dry place inaccessible to children (pack the appliance).
  • If the supply cord is damaged, it must be replaced by the manufacturer, or its service agent, or a qualified person in order to avoid a hazard.
  • Prior to any maintenance, cleaning and after each use, switch off the appliance and unplug the main cable from the socket.
  • FRapairs ta electrical appliances must only be carried out by a qualified electrical technician.

PARTS LIST

  1.  Handle
  2. Fan blades
  3.  Protacthve front grille
  4.  Feet
  5.  Anti-slip pad
  6. Housing
  7. Control switch

OPERATING INSTRUCTIONS

CAUTION: Ensure the product is fully a55embled before plugging it into a power socket

  1.  Remove all parts from packing.
  2.  Place the fan on a flat, level and stable surface.
  3.  Plug into a 220-240V-50Hz power socket, the appliance will be in standby mode.

SPEED SETTING

  1.  Turn the control switch and set the desired speed. (1- low speed, 2- medium speed, 3- high speed).
  2.  Unplug the fan when not in use

MAINTENANCE AND STORAGE

  • Unplug the unit

  • To keep the fan clean, the outer shell may be cleaned with a soft, damp cloth You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth.
    CAUTION: DO NOT let the liquid enter the fan.

  • DO NOT use alcohol gasoline, abrasive powders, furniture polish, or rough brusher to cleen the tan. This may cause damage or deterioration to the surface of the tan.

  • DO NOT immerse the fan in water.

  • Wait until the unit is completely dry before use.

  • Store the fan in a cool dry location when not in use. To prevent dust and dirt build-up, use the original packing to pack the unit.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals