CREATE ROOM DB2 Pre Built Dream Box 2 Installation Guide

CREATE ROOM DB2 Pre-Built Dream Box 2

Product Information

Specifications:

• Model: Pre-Built DreamBox 2
• Assembly: Proprietary patented product and instructions
• Customer Service Contact: [email protected] | USA / CANADA: 801-226-2686 (M-F 9AM-5PM MST) | UK/EU: +49 40 69632955 OR +44 7759 335868

Product Usage Instructions

Safety Instructions

Review safety instructions provided before proceeding with assembly to ensure the safety of yourself and others.

Included Hardware

• Various components such as swing door shelf support, metal shelf pegs, connecting bolts, metal hooks, etc.
• Ensure all hardware is accounted for before starting assembly.

Parts Included

• Left Box, Right Box, Swing Door, Center Box, Swing Door Shelves, Large Shelves, etc.
• Check all parts against the provided list to confirm nothing is missing.

Tools Needed

• Phillips Screwdriver
• Electric Drill with socket extensions or 10mm wrench
• A Friend (assembly recommended for two people)

Assembly Instructions

1. Ensure all components are present and accounted for.
2. Follow the proprietary assembly instructions provided with the product.
3. Use the recommended tools for assembly to ensure proper installation.
4. Do not attempt to build alone, as the product is designed for assembly by two people.
5. Handle wood components with care and avoid propping them against walls.

oh happy day
YOU’VE RECEIVED THE PRE-BUILT DREAMBOX 2!
You are minutes away from crafting heaven. Just a few simple steps and you’ll be ready to move in. Should you need any assistance, our customer service team is the friendliest bunch and would be delighted to help you!

REVIEW SAFETY INSTRUCTIONS BEFORE PROCEEDING

Dear Creator,
The safety of you and your loved ones is our number one priority. Please take a moment to review the following safety instructions before you begin assembling your DreamBox. Failure to follow these procedures could results in serious or fatal injuries.

• Keep kids and pets out of the building zone and away from the DreamBox until the box is filled and the Safety Brackets have been attached to the wall.
• Keep the DreamBox in the Enclosed Shape (indicated in instructions) and the table closed during the assem-bly and move in process.
• Add Stabilizers to Center Box and Side Boxes as indicated in the instructions to provide stability support. Stabilizers can be removed, if desired, once the Safety Brackets have been attached to the wall.
• Be aware of weight distribution. Add heavy items to the bottom of the Center Box and Side Boxes first.
• Ensure all DreamBox wheels are in the forward facing position when stationary.
• Follow DreamBox table weight limit of 50 lbs.
• Do not add weight to the front of your Deluxe Crown.
• Use the included Safety Kit with Safety Brackets to properly attach the DreamBox to your wall.

Thank you for your attention. Please do not hesitate to reach out with any questions or concerns.

pre-built dreambox 2

INCLUDED HARDWARE

PARTS INCLUDED

INVIEW TOTES

TOOLS YOU’LL NEED

Before lifting any wood components please remove all cardboard, totes, and other items to reduce weight while lifting.

Installation

1. Remove ALL contents from Left & Right Boxes before attempting to lift. With two people, carry the Left & Right Boxes by the ends into the room where you will be setting it up. Lay the boxes on their backs on a soft surface, like a blanket or carpet, to protect the doors.
   TIP:
   Do not prop wood components against walls. Lay on a flat surface instead.
   CAUTION: This step requires two people. Weighs 160lbs/72.5kg.

2. Carefully lift DreamBox center into desired room.

3. Stand up Center Box. Leave table in upright position until build is complete. Install 2 Stabilizers before moving on to next steps.

4. Skip this step if you did not purchase the Short Divider Accessory Kit. Use the 5 mm hole plugs to cover the 2 holes.

5. Skip this step if you did not purchase the Short Divider Accessory Kit. Use the 5 mm hole plugs to cover the 2 holes.

6. Attach Left and Right side boxes to the Center Box using installed hinges and 18 euro screws.

7. Install Tote Tracks, Door Handles, and Metal Shelf Pegs to corresponding holes.

8. Install Tote Tracks into Upper Divider. Install tracks on the side WITHOUT the white cams. Install Metal Shelf Pegs on Lower Divider. Install pegs on the side WITHOUT the white cams.

9. 9.1: Place 12 Connecting Bolts in the corresponding holes on both the Left and Right Boxes.
   9.2: Install Upper and Lower dividers with the white cams facing away from the small tote section.
   9.3: Install the 4 remaining connecting bolts under LB and RB Shelf. Secure by locking 16 white cams.
   TIP:
   1. If the Side Tables were purchased, place Lower Dividers on the outer most part of the box.
   2. Line up the divider and box holes.
   IMPORTANT:
   Position DreamBox like the below graphic before installing crafting supplies to reduce tipping hazard. DreamBox MUST remain in this enclosed position until the safety brackets are installed.

10. Add Stabilizers to Side Boxes.
    Attach swing doors using 18 Euro Screws.

11. Attach swing doors using 18 Euro Screws.
    TIP:
    1. Do not use Drill to avoid stripping.
    2. Make sure the 4 pointed corners of the Open Swing Door Catch square are pressed against the side box.
    WARNING: Serious or fatal crushing injuries can occur from tipping furniture. To prevent tip-over hazard, secure the DreamBox to the wall before use.

12. Determine the appropriate distance of the safety bracket from the wall. Secure the safety bracket in place by tightening 4 Short Screws into the DreamBox. Locate the wall studs to find the optimal position for attachment. Use Large Screws to securely fasten the DreamBox to the wall by anchoring them into the wall studs. If wall studs cannot be found, utilize drywall screws instead and use long screws to attach the DreamBox to the wall.

13. Skip this step if you did not purchase Deluxe Crown with Double Light
    4.1: Insert Cams into Crown Base and Center Box Lid. Insert Double Ended Bolts into Crown base. Tighten Cams
    4.2: Connect Crown Base to Center Box Lid, and tighten Cams by turning until locked.
    4.3: Insert Posts into Crown Sides and Crown Front. Insert Cams into Crown Sides.

14. Skip this step if you did not purchase the crown.
    Use a small ladder or step stool and attach Crown Front and Crown Sides to Crown Tops 1 and 2.
    Tighten Cams.

15. Skip this step if you did not purchase the crown.
    Install Light Strip by threading cord through crown hole and removing adhesive back to apply to crown
    light cut out. Then connect Light Strips cord to Splitter and then connect Splitter to Light Plug.
    three cheers
    YOU’RE DOING GREAT!
    The fun is just beginning. Now it’s time to customize your DreamBox and start moving in.
    •Begin by customizing your tracks, totes, and shelves to fit your organization needs.
    •All medium totes require a shelf. All shelves use 4 metal shelf pegs.
    TIP:
    Insert your tote tracks into the peg holes in this position. (Bumpers on top.) Two tracks needed for each tote.

16. Screw in Metal Hooks to Hook Shelf in Swing door. Install shelves where you like.
    TIP:
    Two swing door shelves needed per pockeT

17. Install White Guards and Acrylic Cups. Place Metal Rods into Acrylic Cups and push down. Fill lower divider holes that were not used with 5 mm hole plugs.

HALF-SET TOTE STORAGE CONFIGURATION

Install tote tracks and metal pegs at shelf peg holes indicated by number, counting from the bottom. (Except the small section in the lower half of Right and Left Boxes).

FULL SET TOTE STORAGE CONFIGURATION

Install tote tracks and metal pegs at shelf peg holes indicated by number, counting from the bottom. (Except the small section in the lower half of Right and Left Boxes).

yipee!
YOU’VE DONE IT.
Now it’s time to fill up your new DreamBox 2 with all your crafting goodies.
Remember to share pictures of your crafts and craft space with us on Facebook @CreateRoomFamily.

Sincerely,
The Create Room Team [email protected] 801-226-2686

[email protected]
WWW.CREATEROOM.COM
USA / CANADA: 801-226-2686 (M-F 9AM-5PM MST) UK/EU: +49 40 69632955 OR +44 7759 335868

We are excited for you to enjoy your inspiring new workspace and can’t wait to see pictures! Share your photos on Facebook and Instagram and don’t forget to tag @createroomco.
Happy crafting!

Troubleshooting for the Dreambox 2

1. “Can my DreamBox 2 be on the carpet?”
   We highly recommend our furniture on wheels to be on a hard floor. The DreamBox 2 can weigh up to 1200 lbs or more with all of your treasures. The wheels need to “give” a little so the strain isn’t added to the connecting joints of the box. Please use a hard surface under your DreamBox 2 wheels.

2. “My DreamBox 2 is on a hard floor and moves too much when I open or close it.”
   Every DreamBox 2 comes with 4 Base Stabilizers. These must be used for stability and to prevent unwanted move-ment during the assembly and move in process until the Safety Brackets have been attached to the wall. The Safety Brackets will hold your DreamBox firmly in place.

3. My DreamBox 2 has a space between the doors when I close it. How do I get the doors to close all the way?” Please check your floor to make sure the area you are storing the DreamBox 2 has a level floor, and has no bumps, such as grout lines. Then check the location of the castors. Because our wheels spin, they may be turned the wrong direction, causing the door to pull back. We also have customers purchase decorative locks for the front 2 doors to child proof their DreamBox 2.

4. “My DreamBox 2 is not closing.”
   Check to make sure all of your treasures are secure and in place.

5. “I have a gap between my Crown and my DreamBox 2. Is this supposed to be there?”
   Yes! This is necessary as you don’t want the doors to scrape the crown or damage your light when opening and closing your DreamBox 2.

6. When I close my DreamBox 2 the doors are not even.
   Make sure the weight of your treasures is distributed evenly in the 2 side boxes. Check your floor to make sure it is level. Check the direction of the wheels to make sure they are facing front when closed.

7. Why do the dividers for the Inview totes only connect at the bottom?
   We use a strong, bendable clear plastic called “Clearblend”. The inview tote dividers for the medium and small totes were designed to divide your supplies for organization, yet easily removable. We want the bendable plastic to work for you in holding your unique supplies.

8. Why doesn’t the DreamBox 2 have locking wheels?
   The DreamBox design needs the wheels to spin freely, preventing too much stress on the joints of your filled Dream-Box. It can hold about 650 pounds of supplies!

Warranty

IMMEDIATE INSPECTION REQUIRED
Upon receiving your Create Room furniture, promptly inspect the package for any external or concealed dam-age. Report any visible damage to the delivery driver and contact our Customer Service for both freight and parcel deliveries. For concealed damage, notify us within 5 business days with photos to ensure timely support.
30-DAY COVERAGE FOR ORDER ACCURACY
If your order has missing or incorrect items, let us know within 30 calendar days of delivery. We want to ensure your crafting setup is complete and ready for use.
1-YEAR MANUFACTURING DEFECT WARRANTY
This warranty covers manufacturing defects affecting use and assembly for a year from delivery. If you run into issues with part quality, including holes drilled wrong or edge banding flaws, we’ll provide replacement parts.
PRE-ASSEMBLED SECTIONS SUPPORT
For pre-assembled furniture parts requiring replacements, we cover individual parts. Our Customer Service team is available to guide you through the replacement process, offering detailed instructions or service ideas.

WARRANTY EXCLUSIONS

• Damage from improper assembly, misuse, or accidents
• Normal wear and tear
• Shipping damage after the initial inspection period
• Not following instructions for assembly, use, or safety
• Non-manufacturing defect claims made after 30 days from delivery
• Environmental damage or inadequate storage conditions
• Damage to personal items from misusing Create Room products
• Use of wheeled furniture on unsuitable surfaces
• Accessories not part of the integral furniture package
• Secondhand purchases or gifts
• Theft
• Minor cosmetic variances

CUSTOMER SERVICE AND SUPPORT

Contact our Customer Service for any concerns or help at 1 801-226-2686, [email protected], or through live chat on createroom.com.

FAQ

Q: What should I do if I encounter missing parts during assembly?

A: If you find any missing parts, please contact customer service immediately for assistance in obtaining the necessary components.

Q: Can I customize the DreamBox 2 with additional shelves or accessories?

A: While the DreamBox 2 comes with a specific set of components, you may explore customization options through Create Room’s website or by contacting customer service for guidance.

References

• Om

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>