di-soric LI 296-5-1475-1510 T Measuring Light Curtains Grids Owner’s Manual
- June 13, 2024
- di-soric
Table of Contents
di-soric LI 296-5-1475-1510 T Measuring Light Curtains Grids
Product Information
The 209563 LI 296-5-1475-1510 T Light grids are a type of sensor with evaluation electronics for measuring and switching. They are designed with a compact aluminum housing that is easy to install. The light grids are available with different types of evaluation electronics, such as LVE, LVX, and LVB, which offer different functions for beam evaluation and switching. The product also includes a transmitter, receiver, and monitoring height feature.
Product Usage Instructions
To use the 209563 LI 296-5-1475-1510 T Light grids, follow these steps:
- Choose the appropriate evaluation electronics (LVE, LVX, or LVB) based on your desired functions for beam evaluation and switching.
- Install the light grids by mounting the transmitter and receiver in the desired location.
- Adjust the monitoring height (H) according to your application requirements.
- Connect the light grids to the power source using the specified service voltage.
- Ensure proper connection of the profile cross-section and dimension to fit your setup.
- Make sure the housing material is securely mounted.
- Check the protection class and ensure it meets your environmental conditions.
- Configure the evaluation and evaluation electronics settings as needed.
- Verify the output function and switching output are properly set for your application.
- Confirm the light source color and wavelength match your requirements.
- Select the desired beam evaluation mode (horizontal or diagonal).
- Set the beam separation and number of beams based on your application needs.
- Adjust the monitoring height and range according to your specific requirements.
If you need further assistance or have specific questions about using the product, refer to the provided user manual or contact the manufacturer for support.
- With evaluation electronics LVE … / LVX … measuring and switching
- With evaluation electronics LVB … switching
- Beam evaluation horizontal or diagonal
- Compact design
- Aluminum housing
- Easy to install
- Transmitter
- Receiver
- Monitoring height H
- Profile length L
- Evaluation electronics
- Profile cross-section
To be used with evaluation electronics LVE … / LVX … / LVB …
- BN: brown
- GN: green
- GY: grey
- WH: white
- YE: yellow
Technical data
- Service voltage 20 … 26 V DC (see evaluation electronics)
- Profile cross-section 12 x 58 mm
- Dimension
- X: 17,5 mm
- Y: 17,5 mm
- Profile length 1.510 mm
- Housing material Aluminum (natural)
- Protection class III, operation on protective low voltage
- Evaluation absolute, percentage, Configurable via evaluation electronics
- Evaluation electronics external
- Output function Configurable via evaluation electronics
- Switching output Configurable via evaluation electronics, NO, NC
- Light source LED
- Color Infrared
- Wavelength 880 nm
- Beam evaluation via external evaluation electronics
- Beam separation 5 mm
- Number of beams 296
- Monitoring height 1.475 mm
- Range 250 … 6.000 mm (adjustable via evaluation electronics)
- Measuring range 1.475 mm
- Ambient temperature during operation -20 … +40 °C
- Protection type IP 54 (IP 65 optional)
- Connection Cable, 4,0 m (with plug connector, additional variants on request)
More information/accessories https://www.di-soric.com/209563
di-soric GmbH & Co. KG . Steinbeisstraße 6 . DE-73660 Urbach . www.di-
soric.com
Documents / Resources
| di-
soric LI 296-5-1475-1510 T Measuring Light Curtains
Grids
[pdf] Owner's Manual
LI 296-5-1475-1510 T Measuring Light Curtains Grids, LI 296-5-1475-1510 T,
Measuring Light Curtains Grids, Light Curtains Grids, Curtains Grids, Grids
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>