HOSELINK USL460 Warm White Solar Festoon Lights 25 Bulb Starter Set User Manual
- June 5, 2024
- HOSELINK
Table of Contents
HOSELINK USL460 Warm White Solar Festoon Lights 25 Bulb Starter Set
Lighting Modes
Light modes include constant light, slow flash, quick flash, and pulsating light. The built-in intelligent light sensor detects darkness, automatically illuminating at dusk and turning off at dawn. You can adjust the lighting mode by clicking the ‘MODE’ button located on the back of the solar panel.
Product Installation
Option 1
STEP ONE: Find a suitable location
Solar lights need access to direct sunlight for optimum results; preferably
6-8 hours per day.
STEP TWO: Assemble the ground spike
Slot the ground spike into the tube on the back of the solar panel, and then
push the spike into the ground.
STEP THREE: Turn on the light
Use the ‘ON/OFF button located on the back of the solar panel to turn the
lights on. Press the ‘MODE’ button to select which light setting you want.
Option 2
Follow these steps to mount to a wall or fence using the supplied plugs and screws:
- STEP ONE: Mark out the holes with a marker pen.
- STEP TWO: Using a 15-64” drill piece for masonry installation, drill the two holes.
- STEP THREE: Gently hammer the plugs into place and then secure the screws tightly.
- FOR TIMBER: Drill 1/8” pilot holes to guide the screws into place (plastic plugs are not required).
Extensions are available to purchase without the solar panel to give you additional lighting. However, as the working current of the solar panel is fixed, the more light bulbs attached, the less brightness is achieved.
Specifications
SOLAR PANEL | 5.5V/3W |
---|---|
LITHIUM BATTERY | 3.7V/2200mAh |
WORKING TIME | 8-12 hours |
(depending on light mode)
CHARGE TIME| 8 hours
STRING LENGTH| 26 Feet
DISTANCE TO FIRST BULB| 2 1/2 Feet
NUMBER OF BULBS| 25 + 2 spares
BULB SIZE| 1 1/2 Inch
LIGHT TEMPERATURES (KELVINS)| 2200K
LED LUMANS| 240LM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>