V-TAC VT-2412 Hidden Touch Dimming Switch Instruction Manual
- May 15, 2024
- V TAC
Table of Contents
V-TAC VT-2412 Hidden Touch Dimming Switch
Product Information
Specifications :
- Model: VT-2412
- SKU: 23465, 23466
- Input Voltage: DC: 12-24V
- Rated Load: 60W
- Input Channel: 1 Channel
- Max Output Current: 6A
- Max Output Power: 72W/12V, 144W/24V (Max)
- Type of Control: By Touch
- Functions: On/Off and Dimming
- Dimming Range: 10%-100%
- Cable Length: 1000mm
- Surface Thickness: 25mm (Applied to chipboard)
- Working Temperature: IP Rating Material
- Dimension: XXxXX mm
- Compatible with: V-TAC LED Strip Lights
Product Usage Instructions
-
Description :
The Hidden Touch Dimming Switch is a small controller with a capacitive sensor that allows for on/off functionality and dimming control for LED lighting within a range of 10%-100% brightness. -
On/Off Function:
To turn the LED light on, quickly touch the surface above the mounted sensor. A second quick touch will turn the LED light off. -
Dimming (Adjusting Brightness):
To adjust the brightness of the LED light, perform a long hand-touch on the surface above the mounted sensor. A second long touch will adjust the brightness in the opposite direction.
Installation Instructions:
- Clean the inside of the door thoroughly and install the controller.
- Peel off the protective film from the adhesive sticker.
- Stick the dimming switch on the mounting surface.
- Connect the OUTPUT connector to the load and the INPUT connector to the power supply for the LED lights.
Wiring Diagram:
FAQ :
-
Q: What should I do if the dimming switch does not respond to touch?
A: If the dimming switch does not respond to touch, please check the power supply connection and ensure that the surface above the sensor is clean and free from any obstructions. -
Q: Can I use this dimming switch for incandescent or fluorescent lighting?
A: No, this dimming switch is intended exclusively for use with LED lighting.
INSTRUCTION MANUAL
HIDDEN TOUCH DIMMING SWITCH
TECHNICAL DATA
- MODEL VT-2412
- SKU 23465, 23466
- INPUT VOLTAGE DC: 12-24V
- RATED LOAD 60W
- INPUT CHANNEL 1 Channel
- MAX OUTPUT CURRENT 6A
- MAX OUTPUT POWER 72W/12V, 144W/24V (Max)
- TYPE OF CONTROL By Touch
- FUNCTIONS On/Off and Dimming
- DIMMING RANGE 10%-100%
- CABLE LENGTH 1000mm
- SURFACE THICKNESS ≤25mm (Applied to chipboard)
- WORKING TEMPERATURE -20°C to +40°C
- IP RATING IP20
- MATERIAL XXXX
- DIMENSION XXxXX mm
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product.
- Caution, risk of electric shock.
- This marking indicates that this product should not be disposed of with other household wastes.
- MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
In case of any query/issue with the product, please reach out to us at:
support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest
dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- For indoor use only.
DESCRIPTION
The product is a small controller with a capacitive sensor. It has two operating functions: on/off and dimming (adjusting the brightness of LED lighting) within wide ranges (10%-100%).
ON / OFF FUNCTION
By a single quick hand touch on the surface above the mounted sensor, the LED
is turned on. By a second quick hand touch on the same place, the LED lighting
is turned off.
DIMMING (ADJUSTING BRIGHTNESS)
- By a long hand-touch on the surface above the mounted sensor, the brightness of the LED lighting is increased or decreased. By second long hand-touch, the brightness is adjusted at the opposite direction.
- Note: The dimming switch is intended exclusively for LED lighting. After a power loss and its restoration, the switch remains in the off position.
INSTALLATION INSTRUCTIONS
- Clean the inside of the door thoroughly and install the controller here.(FIG 1)
- Peel off the protective film from the adhesive sticker. (FIG 2)
- Stick the dimming switch on the mounting surface(FIG 1)
- Connect the OUTPUT connector to the load and the INPUT connector to the power supply for te LED lights.
NOTE
- Must be installed on the reverse side of the mounting surface.
- Surface thickness ≤ 25mm.
- Not suitable for installation behind mirrors or metal surfaces as it would not function.
WIRING DIAGRAM
NOTES
- Do not dissemble the product.
- Do not install the switch in places with high humidity.
- Use dry cloth, never a cleaning agent.
- Replace the whole set in case of malfunction.
- Ensure cooling to prevent a risk of fire.
- The maximum thickness of 25 mm is for mounting surfaces made of chipboard.
- The switch is not suitable for mirrors and metal surfaces.
