CREATE ROOM U1123 Deluxe Crown With Double Light Instruction Manual

CREATE ROOM U1123 Deluxe Crown With Double Light

Product Specifications

• Model: U1123
• Hardware Needed: x4 Double Ended Bolts, x24 Locking Cams
• Parts Included:
  • x1 Splitter
  • x22 Posts
  • x1 Light Plug
  • x1 Crown Base
  • x1 Crown Lid
  • x1 Crown Side (Left)
  • x1 Crown Side (Right)
  • x1 Crown Front

Product Usage Instructions

Assembly:

1. Remove the 4 topmost Back Screws and save them for later installation.
2. Turn 6 Locking Cams until the arrow is facing up.
3. With the help of a friend, lift the Center Box Lid.
4. Insert 6 posts in the Crown Lid, then insert Cams into Crown Base and Center Box Lid. Insert Double Ended Bolts into Crown Base and tighten Cams.
5. Connect Crown Base to Center Box Lid, insert Posts into Crown Sides and Crown Front, and tighten Cams until locked.
6. Lift the Crown Base and Lid with a friend and guide the Posts into the corresponding holes. Tighten Cams on the inside and replace the 4 Back Screws to attach the crown to your DreamBox.
7. Install Crown Sides and Front by inserting Posts into corresponding holes. Install 2 Light Strips under the crown lid with their own on/off switches. Connect Light Strips to the Splitter and then connect the Splitter to the Light Plug.

Wall Mounting:

To prevent tip-over hazard, secure the DreamBox to the wall before use by following these steps:

1. Determine the appropriate distance of the safety bracket from the wall.
2. Secure the Safety Brackets in place by tightening 4 Short Screws into the DreamBox.
3. Locate wall studs for optimal attachment position. Use Large Screws to fasten the DreamBox to the wall. If wall studs are not available, use Drywall Screws instead.

Congratulations!

Congrats on setting up your new Deluxe Crown! Feel free to share pictures of your crafts and craft space with us on Facebook @CreateRoomFamily.

Frequently Asked Questions

Q: Can I remove the stabilizers after attaching Safety Brackets?

A: Yes, stabilizers can be removed after Safety Brackets have been securely attached.

HARDWARE YOU’LL NEED

PARTS INCLUDES

Installation Instruction

1. Carefully access the 4 topmost Back Screws and remove them. Save Back Screws as you will need them for later installation.

2. Turn 6 Cams until the arrow is facing up (towards lid of DreamBox).
   CAUTION: This step requires two people.

3. Grab a friend and carefully lift the Center Box Lid.

4. 4.1: Once the Center Box Lid is removed add 6 posts in Crown Lid.

   • 4.2: Insert Cams into Crown Base and Center Box Lid. Insert Double Ended Bolts into Crown Base.Tighten Cams.

5. 5.1: Connect Crown Base to Center Box Lid, and tighten Cams by turning until locked.

   • 5.2: Insert Posts into Crown Sides and Crown Front. Insert Cams into Crown Sides.

6. Grab a friend and carefully lift the Crown Base and Lid and guide the 6 Posts into the holes on CB 1 and CB2. Once crown is flush carefully tighten Cams on the inside of CB 1 and 2 . Replace the 4 Back Screws to attach your crown to your DreamBox.

7. 7.1: Install Crown Sides and Front into Crown Base and Center Box Lid by inserting Posts into corresponding holes. Tighten Cams by turning until tight.

   • 7.2: Install 2 Light Strips by threading cords through right or left hole on Crown Base. Remove adhesive back, and adhere it into the grooves underneath the crown lid. Each light has their own on/off switch.
   • 7.3: Connect light strips to Splitter and then connect Splitter to Light Plug. Warning: Failure to use the included plug in place of your original plug may result in serious damage or fire.
     WARNING: Serious or fatal crushing injuries can occur from tipping furniture. To prevent tip-over hazard, secure the DreamBox to the wall before use

8. Determine the appropriate distance of the safety bracket from the wall. Secure the Safety Brackets in place by tightening 4 Short Screws into the DreamBox. Locate the wall studs to find the optimal position for attachment. Use Large Screws to securely fasten the DreamBox to the wall by anchoring them into the wall studs. If wall studs cannot be found, utilize Drywall Screws instead and use long screws to attach the DreamBox to the wall.

TIP:

Stabilizers can be removed if desired after Safety Brackets have been attached

YOU’VE DONE IT.

Congrats on your new setup! Remember to share pictures of your crafts and craft space with us on Facebook @CreateRoomFamily

Proprietary, patented product and assembly instructions. Do not copy or distribute.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>