CREATE Downmix Retro Food Processor User Manual

Downmix Retro
User manual

Downmix Retro Food Processor

Thank you for choosing our stand mixer. Before using the appliance, and to ensure the best use, carefully read these instructions.
The safety precautions enclosed herein reduce the risk of death, injury and electrical shock when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt and package. If applicable, pass these instructions on to the next owner of the appliance. Always follow basic safety precautions and accident prevention measures when using an electrical appliance. We assume no liability for customer failing to comply with these requirements.

SECURITY INSTRUCTIONS

When using any electrical appliance, basic safety precautions should always be observed.

• Read all the instructions.
• To protect yourself against risk of electrical shock, do not put the appliance, unite cord or plug in water or other liquid.
• Close supervision is necessary when an appliance is used by or near children.
• Unplug the appliance when not in use, when you want to change any accessory and before cleaning.
• Avoid contacting moving parts.
• If the supply cord is damaged, it must be replaced by manufacturer or its service agent or similarly qualified in order to avoid a hazard.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electrical shock or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter.
• Keep hands and utensils away from moving blades or discs while processing food to reduce risk of severe injury to person or damage to the food mixer.
• Blades are very sharp, hand carefully.
• To reduce the risk of injury, never place cutting blades or discs on base.
• Never feed food by hand, always use food pusher.
• Turn off the machine before replacing any attachment.
• Use the product and assemble the accessory as mentioned on this user manual only.
• Switch OFF the appliance before changing accessories or approaching parts which move in use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or metal capabilities, or lack of experience and knowledge, useless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervision to ensure that they do no play with the appliance.

PARTS LIST

• Sold separately

1. Front cover
2. Upper body
3. Control panel
4. Lower body
5. Transparent bowl cover
6. Tilt-head button
7. Pedestal
8. Balloon whisk
9. Stainless steel bowl| 10. Kneading hook
11. Beater
12. Rubber feet
13. Food slicer
14. Meat grinder
15. Sausage maker
16. Pasta maker
1 7. Cookie maker *
---|---

CONTROL PANEL

1. Accessories
2. Speed display
3. Time / Speed button| 4. Timer
5. On / Off button
---|---

Switch on the power and turn on the display, the speed and timer display “0”.
There are 6 speeds;
“-“/”+” are used for speed selecting. Select the speed press the power button and confirm. The timer will begin to flicker, press the “-“/”+” buttons to adjust the time and confirm. Then press the power button, the machine will start to work and the timer will begin the countdown.
During operation, you can change the speed as function setting.
If you don’t need to set the time, after confirming the speed, press the power button twice. The machine will start to work and the timer will begin the countdown. Press the power button to stop working.

WORKING TIME

The appliance will stop automatically according to the following table:

RECOMMENDED SPEED SETTING

ACCESORIES| SPEEDS| CAPACITY| RECOMMEDED
TIME| REMARK
---|---|---|---|---
Kneading hook| 1  – 3| 200 g – 1000 g| 5 minuts| Dense food like dough
Beater| 3  – 4| 200 g – 1000 g| 5 minuts| Medium-density food like salad or mashed potatoe
Balloon whisk| 5 – 6| 200 – 800 ml| 6 minuts| Light-density food like eggs, butter, cream, etc.
Meat grinder| 4  – 5| 1000 g| 6 minuts|
Salad slicer and shredder| 4 – 5| 1000 g| 6 minuts|

HOW TO USE THE ACCESSORIES

Warning:

• Do not operate the machine continuously for more than 10 minutes. After one time use, the machine should be cooled down for 30 minutes. Do not make dough exceed 1 kg. Operate the appliance only when the accessory / tool is attached according to this table and in the operating position.
• There is risk of injury from the rotating tools. While the appliance is operating, keep fingers clear of the mixing bowl. Do not change tools until the appliance is at a standstill and have been unplugged. When it is switched off, the drive continues running briefly.
• NOTE: DO NOT WASH THE MEAT GRINDER, THE PASTA MAKER, THE SAUSAGE MAKER OR THE BALOON WHISK IN THE DISHWASHER.

KNEADING HOOK, BEATER AND BALLOON WHISK

1. Press the head down with one hand. Then, press the tilt-head button with the other hand and lift the head up until you hear the “click” sound.

2. Assemble the bowl filled with the ingredients into the base anticlockwise.

3. Assemble the bowl cover into the arm clockwise.

4. According to your needs, assemble beater, balloon whisk or kneading hook into the rotating axis and then revolve them clockwise. 

5. Press the head down with one hand. Then, press the tilt-head button with the other hand until you hear the “click” sound, set the head to the position as picture shown. Power on  and set appropriate speed.
   

6. After the mix is ready, set the control panel to the “OFF” position and then unplug. Press the tilt-head button and lift the head up until you hear the “click” sound.

7. Remove the beater, balloon whisk or kneading hook anticlockwise.

8. Remove the bowl cover anticlockwise.

9. Then, remove the bowl with your preparation anticlockwise.

MEAT GRINDER

1. Remove the front cover.
   

2. Following their sequence, assemble the worm shaft blade and cutting disc into the cutting meat canister, then assemble the cutting screw bar into the cutting meat canister  clockwise. You can also assemble worm shaft, lead cover, sausage canister into cutting meat canister and then assemble the cutting screw bar into the cutting meat canister  clockwise. As well, you can assemble worm shaft, conductor, meatball canister into the cutting meat canister and then assemble the cutting screw bar into the cutting meat  canister clockwise. Or, assemble the worm shaft and noodle accessory into the cutting meat canister and then assemble the cutting screw bar into the cutting meat canister clockwise.
   |
   ---|---
   Meat grinder| Sausage maker
   |
   Meatball maker| Cookie maker

Please remember to disassemble cutting cylinder from the machine, when changing these accessories.

3. Align arrow on cutting cylinder to the other one on the arm then assemble prepared cutting meat canister into the arm counterclockwise shown. Fasten the cutting screw bar  after the cutting meat canister is fixed correctly.

4. Assemble loading tray into the cutting meat canister, then place the bowl to the outlet of the cutting meat canister.
   Power on for running. Turn switch to appropriate speed and then put food into the feeding inlet with pusher to push down food.

5. Turn switch to “OFF” position when food is ready then unplug and cut off power. Remove the pusher and loading tray.

6. Press the release button, remove the cutting meat canister from the arm clockwise.

FOOD SLICER

1. Remove the front cover.

2. Following their sequence, assemble the accessories of the food slicer.

3. Assemble the prepared food slicer counterclockwise.

4. Assemble the food slicer.

5. Press the button ‘OFF’ after food is ready, then unplug and cut off power. Press release button and remove the food slicer clockwise. 

6. Assemble the front cover again.

PASTA MAKER

1. Remove the front cover.

2. Assemble the accessory directed properly.

3. Adjust it to the stand mixer and then adjust the thickness from level 1-8 according to your needs.

4. Once you have finished, turn off the machine and remove the accessory.

5. Remove all the accessories and assemble the front cover.

MAINTENANCE AND CLEANING

• Never immerse the base unit in water or hold under running water.
• Do not use abrasive to clean. Wipe the unit with a damp cloth, if required; use some washing up liquid. Then wipe the unit dry.
• Do not wedge plastic parts in the dishwasher as they could be warped. Rinse and dry thoroughly.
• After washing and drying, immediately place the attachments into a protective sleeve for storage.
• Bowl not suitable for dishwasher.

In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in electric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws.

Point de collecte sur www.quefairedemesdechets.ft

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>