CREATE B0CRBHRGCZ Ceramic Kettle User Manual

CREATE B0CRBHRGCZ Ceramic Kettle User Manual

Thank you for choosing our kettle. Before using this appliance and to ensure its best use, please read the instructions carefully.

The safety precautions listed here reduce the risk of fire, electric shock, and injury when followed correctly. Please keep the manual in a safe place for future reference, as well as the warranty, sales receipt and box. If applicable, give these instructions to the future owner of the appliance. Always follow basic safety instructions and hazard prevention measures when using an electrical appliance. The manufacturer will not be responsible for any damage resulting from the user’s failure to follow these instructions.

SECURITY INSTRUCTIONS

When using any electrical appliance, basic safety precautions should always be observed.

• To protect against electrical hazards, do not immerse the power cord, plug, electric base or kettle in water or any other liquid.
• Do not use the kettle in damp places or near any source of water. Do not use outdoors.
• Always use the handles of the appliance as some parts may overheat.
• This appliance can be used by children aged 8 years and older and people with reduced physical, sensory or mental capabilities, or lack of experience or limited knowledge, provided they are supervised by a person responsible for their safety or who has been trained how to use it. the appliance safely.
• Children should not play with this device. They should also not carry out cleaning and maintenance tasks on the device unless they are over 8  ears old and supervised.
• Keep the appliance and the cord out of the reach of children under 8 years of age.
• Before cleaning the appliance, turn off and unplug it from the wall outlet.
• Unplug the kettle from the power supply when not in use.
• To disconnect the device, never pull on the cable. Switch off the outlet, then grasp the plug and unplug the kettle.
• Do not use the kettle if it has been damaged in any way. Do not try to repair it yourself. Contact the brand’s after-sales service to avoid risks.
• Do not use it on an inclined plane or unstable surface.
• Do not move the kettle while it is on.
• Make sure the lid is properly closed when in use.
• Do not open the lid while the water is heating or boiling.
• Be careful when pouring the water you have heated. Do not tilt the kettle too much.
• The scald hazard persists long after the water has boiled. Keep the kettle off the edge of tables or counters and out of the reach of children.
• The kettle can only be used with the electric base provided.
• Coil excess wire under the electrical base.
• Do not place the appliance on or near heat sources.
• Do not use this appliance for any purpose other than heating water.
• Do not turn on the kettle unless there are at least two cups of water.
• Do not exceed the maximum water mark, otherwise when it boils it could come out of the kettle spout.
• Do not leave the product unattended when in use or where it can be touched by children.
• Do not use alkaline or strong abrasive cleaning agents when cleaning this appliance. Follow the instructions in the “Cleaning and Maintenance” section to clean our kettle.
• This appliance is not designed to operate using an external timer or independent remote control system.
• Descale the kettle regularly to ensure proper operation.
• If the power cord is damaged, it must be replaced by the manufacturer. Contact the brand’s after-sales service.
• This appliance is for home use only

PARTS LIST

1. Nozzle
2. Body
3. Base
4. Top
5. Handle
6. Ignition switch
7. indicator light

INSTRUCTIONS FOR USE

BEFORE FIRST USE

Before you start using the kettle, make sure your supply voltage is the same as that indicated below the kettle. Place the power base on a stable, level surface. Uncoil the power cord from under the base.

The kettle should be filled with water to the maximum mark and boiled 2 or 3 times. The boiled water should be discarded and the inside of the kettle rinsed with cold water (if the water is very hard, a deposit of dust may form or the water tends to appear cloudy. This is a normal calcium buildup and is in no way harmful).

HOW TO BOIL WATER

CAUTION: If you have just boiled water, the appliance will be full of steam. Open the lid with caution, as it could cause burns due to the steam contained inside.

1. Remove the kettle from the electric base.
2. Lift the lid carefully to allow any excess steam to escape.
3. Fill the kettle with at least 2 cups of water. Do not fill above the “max” line.
4. If overfilled, boiling water may overflow from the kettle and may cause burns.
5. Replace the lid making sure to achieve a proper seal.

SWITCHED ON

1. Plug the power base into a wall outlet.
2. Place the kettle on a flat, stable surface.
3. Place the kettle on the electric base. Be careful not to spill water.
4. Turn on the switch. The indicator light will come on and the kettle will begin to heat up.
5. Do not remove the kettle when it is in the heating cycle.
6. Once the water has boiled, the kettle and indicator light will turn off. Remove the kettle from the base and carefully pour out the water.

CAUTION: Stay away as steam will come out of the spout when boiling.

OFF

1. Once the water has boiled, the device will turn off by itself.
2. To switch it off manually, lift the switch or remove the kettle from the base.

GENERAL INDICATIONS

• Always lift the kettle by the handle to serve. The sides can be very hot.
• To avoid the risk of splashing, pour slowly and do not tilt the kettle too much.
• Do not tilt the kettle backwards.
• There may be some discoloration on the bottom of the kettle. This is due to the bonding of the material to the bottom of the boiler.
• Do not use with insufficient water.
• Using the kettle with insufficient water will shorten the life of the element.
• If the kettle is accidentally switched on when it does not contain enough water, a boil dry cutout will switch the kettle off.
• To prevent the kettle from turning on and off, remove it from the electric base.
• Place the kettle on a stable heat-resistant surface until it has cooled completely.
• Do not fill the kettle with water until it is cold. It could splash and create burns.

CLEANING AND MAINTENANCE

• Check that the kettle is switched off.
• Unplug the base from the electrical outlet.
• Let the kettle cool down completely.
• Clean the exterior of the kettle and the electric base with a damp cloth.
• If necessary, a mild (dishwasher) detergent can be used.
• Keep all connectors and plugs dry.
• Do not place the kettle or electric base in liquids or in the dishwasher.
• Do not use solvents or strong or abrasive cleaning agents.

DECALCIFY

• Descale regularly, even in soft water areas
• Use a descaler suitable for plastic products (most kettles have some plastic parts).
• Follow the instructions provided with the descaler.
• If you don’t have a descaler, you can also use white vinegar. Fill the kettle with half a liter of vinegar and let stand 1 hour without heating.
• You can also use citric acid. Boil a liter of water, add 25 g of citric acid and let it sit for 15 minutes.
• After descaling, rinse several times, fill, boil and discard the water to remove all chemical residues.
• IMPORTANT: Do not use other descalers such as those containing formic or sulfamic acid.

PROBLEM RESOLUTION

• If the kettle does not work, check if the cord is plugged in correctly, if the electricity is on or the kettle is placed properly on the base.
• If the kettle boils dry, the safety cut-off device will activate. Wait for the kettle to cool and refill it with water. Press the switch and the kettle will automatically restart and start to boil.
• If the appliance turns off before boiling: it means that the kettle needs to be descaled.

In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in electric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>