CREATE Wind Stylance DC Ceiling Fan User Manual

CREATE Wind Stylance DC Ceiling Fan

Thank you for choosing our ceiling fan. Before using the appliance, and to ensure the best use, carefully read these instructions. The safety precautions enclosed herein reduce the risk of death, injury and electrical shock when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt and package. If applicable, pass these instructions on to the next owner of the appliance. Always follow basic safety precautions and accident-prevention measures when using an electrical appliance. We assume no liability for customer failing to comply with these requirements.

Product Information

Wind Stylance DC Ceiling Fan with DC Motor

The Wind Stylance DC Ceiling Fan is a high-quality ceiling fan with a DC motor that provides powerful and efficient performance. This fan comes in two variants, one with an LED light and one without. The fan is equipped with a remote control that allows users to adjust the fan speed, light intensity, color temperature, and set a timer. The fan is available in multiple languages, including English, Italiano, Nederlands, Deutsch, and Polski.

Product Parts List

The parts included in the package are:

• Canopy
• Downrod and hanging ball
• Downrod
• Extension screws
• Hanger bracket
• Decorative cover
• X3 Blades (Option with light):
  • Motor
  • Remote control
  • Connections panel
• Fixing screws (Option without light):
  • Decorative shade
  • LED panel
  • Decorative cover

Product Remote Control Functions

The remote control has the following functions:

• Light on/off (Option with light only)
• Light intensity control (Option with light only)
• Fan speed control
• Timer setting
• Battery compartment (2 x AAA)
• Color temperature control (Option with light only)
• Power on/off
• Reverse function

Product Installation Instructions

Before starting the installation process, ensure that the following conditions are met:

• The fan should be installed at least 50 cm away from the wall or any obstruction.
• The distance between the blades and floor should be at least 2.3 meters.

Downrod Installation

The fan can be installed using a standard mounting style or an angled mounting style. Follow the steps below to install the fan:

1. Install the hanger bracket on the ceiling using a screwdriver.
2. Insert the downrod through the suspension bar and route the fan motor cables through the inside of the suspension bar.
3. Tighten the suspension bar to the engine and insert the bolt and pin.
4. For standard mounting, hang the fan from the ceiling using a downrod.
5. For angled mounting, use a support brace and hang the fan from the ceiling at an angle.
   • If installing on a wood ceiling, use the provided screws to attach the bracket to the ceiling.
   • If installing on a concrete ceiling, drill an 8 mm diameter hole, insert the bolt, align the bracket with the hole, and tighten with a nut.

Assembling and Hanging the Fan

Follow the steps below to assemble and hang the fan:

1. Attach the cotter pin to the hanging ball slot.
2. Insert the adapter into the hanging ball slot.
3. Attach the decorative cover to the hanging ball slot.
4. Thread the electrical wires through the downrod and attach the cotter pins to each end.
5. Attach the canopy to the downrod using the fixing screw.

Remote Control Connection

Connect the remote control receiver to the fan’s DC input terminals as follows:

• Connect the green/yellow stripe wire to the ground terminal.
• Connect the black wire to the DC L terminal.
• Connect the white wire to the DC N terminal.

SECURITY INSTRUCTIONS

When using any electrical appliance, basic safety precautions should always be observed.

• Read this entire manual carefully before beginning installation. Save this instructions.
• Use only original replacement parts.
• To reduce the risk of personal injury, attach the fan directly to the support structure of the building according to these instructions, and use only the hardware supplied.
• To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.
• All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.
• To reduce the risk of personal injury, do not bend the blade attachment system when installing, balancing, or cleaning the fan.
• Never insert foreign objects between rotating fan blades.
• To reduce the risk of fire, electrical shock, or motor damage, do not use a solid-state speed control with this fan. Use only original speed controls.
• This appliance can be used by children aged from 8 years old and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Close supervision is necessary when any appliance is used by or near children.

NOTE: The important safety precautions and instructions appearing in the manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense and caution are necessary factors in the installation and operation of this fan.

PARTS LIST

• Carefully open the packaging and remove all the items included. Place them on a carpet or a big piece of plastic to avoid any damage.
• Check that all the items listed below have been included.

REMOTE CONTROL

1. Light
2. Light intensity control
3. Fan intensity control
4. Timer
5. Batteries (2 x AAA)
6. Colour temperature control
7. ON / OFF button
8. Reverse function

• Function only available when having the LED plate installed.

INSTALLATION INSTRUCTIONS

• Mark the correct position of the holes and fix the ceiling bracket using the screws with metal anchor or screws and washers suitable for the type of ceiling chosen.
• Check the correct installation of the bracket before hanging the fan. This plate must support the full weight of the fan.

INSTALLATION PREPARATION

• To prevent personal injury and damage, ensure that the hanging location allows the blades a clearance of 2.3 m from the floor and 50 cm from any wall or obstruction.
• Be sure the outlet box is securely attached to the building structure and can support the full weight of the fan.

DOWNROD INSTALLATION

• Choose the suspension bar that best suits your situation: it has a 15 cm and a 25 cm suspension bar.
• Remove the bar bolt, removing the pin, and pass the canopy (roof trim) and the engine canopy through the suspension bar. Next, route the fan motor cables through the inside of the suspension bar. Tighten the suspension bar to the engine and insert the bolt and pin.
• Standard Mounting hangs from the ceiling by a downrod.
• Angled Mounting recommended for a vaulted or angled ceiling.

INSTALLING THE HANGER BRACKET

• Please, drill an 8 mm in diameter hole on the concrete ceiling, and insert the bolt.
• Then, align the bracket with the hole and tighten with a nut.

ASSEMBLING AND HANGING THE FAN

• If you wish to extend the hanging length of your fan, you must remove the hanging ball from the 6 inch downrod provided to use with an extended downrod (included) . (If you wish to use the 6 inch downrod, please proceed to instructions below.)
• To remove the hanging ball, loose the set screw on the hanging ball and remove the pin and bolt. Lower hanging ball and remove stop pin. Slide hanging ball off the original downrod, and slide it down the longer downrod (the top of the downrod should be noted as having a fixing screw hole; use this hole when setting the fixing screw).
• Insert stop pin into top of extended downrod and raise hanging ball.
• Be sure that the stop pin aligns with the slots on the inside of the hanging ball, tighten the fixing screw securely.
• Tip: To prepare for threading electrical wires through the downrod, apply a small piece of electrical tape to the ends of the electrical wires. This will keep the wires together when threading them through the downrod.
• Loosen the fixing screws and nut at the top of the motor housing. Remove the pin and bolt from the downrod (if you have not already done so). Slide the downrod through the canopy.
• Tread electrical wires through the downrod and pull extra wire slack from the upper end of the downrod.
• Place the downrod into the motor housing yoke and reinsert the pin and bolt that were previously removed. Tighten the fixing screws and nut securely.
• Lower the canopy to the motor housing.

REMOTE CONTROL CONNECTION

• Make the connection between the receiver cables and the fan motor cables following the color indications. Make sure the connection is tight.

REMOTE CONTROL RECEIVER COLLOCATION

CANOPY ASSEMBLY

• Raise the canopy to hanging bracket, aligning loosened screws in hanging bracket with slotted holes in the canopy.
• Twist the canopy to lock. Re-insert the screws and secure all the screws with a screwdriver.
• With hanging bracket secured to the outlet box and able to support the fan, you are now ready to hang your fan.
• Grab the fan firmly with two hands. Slide downrod through the opening in the hanging bracket and let the hanging ball rest on the hanging bracket.
• Turn the hanging ball slot until it lines up with the hanging bracket tab.

_ Tip: _Seek the help of another person to hold the stepladder in place and to lift the fan up to you once you are set on the ladder.

BLADES ASSEMBLY

• Align the holes on the blade holder with the holes on the blades and the motor body and screw them in place, but don’t tighten them until they are all placed and screwed in.

_ Tip: _To save time, you can fit the washers on each screw prior to installing the blades.

CONNECTIONS PANEL ASSEMBLY

• Attach the connections plate up to the bottom of the fan by inserting the set screw heads into the key hole slots.
• Rotate them to place and tighten them to secure the plate.

CEILING FAN WITH LED LIGHT

LED LIGHT PANEL AND LAMP SHADE ASSEMBLY

• Connect the single-pin plugs of the connections plate with the ones on the LED panel. The LED panel is magnetized so it will be attached to the connections panel just by placing them together.
• Note: While installing or removing the LED plate, please keep the insulation pads intact carefully.
• Turning the set screws over-tightly or fast will damage the insulation pads.
• Screw the lamp shade back to the connections plate.

CEILING FAN WITHOUT LED LIGHT

DECORATIVE COVER ASSEMBLY

• Once the connections plate has been assembled and secured, screw the decorative cover back to the connections plate using the central screw.

CHECK THE INSTALLATION

• Check the correct operation of the ceiling fan, checking that no strange movement or misalignment is observed in any part of the fan.
• In the event that some kind of hum / vibration can be seen, you can proceed to adjust the blades with the shooting kit.
• This kit has self-adhesive weights and “u” shaped clips.
• Turn off the ceiling fan.
• You can put the clip in the center of any blade and check if the vibration decreases.
• Turn on the fan and check. If no change is seen, turn off the fan and add another clip to a different blade or use the adhesive weights.

DISPOSAL

In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in electric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates that the product at the end of its service life shall be collected as separate waste.

Therefore, any products that have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws.

Made in P.R.C.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>