Nedis ACON2507BK Digital Audio Converter User Manual
- June 5, 2024
- nedis
Table of Contents
ACON2507BK Digital Audio Converter
U ser Manual
Preface
Thank you for purchasing the Nedis ACON2507BK.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
This product is intended to convert an RCA signal into a Toslink signal or vice versa.
The product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
Digital Audio Converter
---|---
Article number
|
ACON2507BK
Power input
|
5.0 VDC ; 0.6 A
Conversion
|
Toslink to RCA
Supported formats
|
DTS, DTS5.1, Dolby Digital, Dolby Digital 5.1, PMC, AAC, MPEG-2
Supported bitrates
|
44.1 kHz 24-bit
48 kHz 24-bit
96 kHz 24-bit
Main parts (image A)
A
1. Toslink female input
2. Power indicator LED
3. RCA female input
4. Input selector switch
5. Power port
6. Toslink female output
7. RCA female output
8. DC to USB power cable
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not expose the product to water or moisture.
- Only use the provided power cable.
Explanation of the symbols on the product or packaging
Icon
|
Description
---|---
|
Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Toslink to RCA
1. Make sure all the devices you want to connect have been switched off.
2. Plug a Toslink cable (not included) into the Toslink female input A
3. Plug the other end of the cable into your audio source device.
4. Plug an RCA cable (not included) into the RCA female output A 7.
5. Plug the other end of the cable into your audio output device.
RCA to Toslink
1. Make sure all the devices you want to connect have been switched off.
2. Plug an RCA cable (not included) into the RCA female input A 3.
3. Plug the other end of the cable into your audio source device.
4. Plug a Toslink cable (not included) into the Toslink female output A 6.
5. Plug the other end of the cable into your audio output device.
Connecting the power supply
1. Plug the DC to USB power cable A 8 into the power port A 5.
2. Plug the other end of A 8 into a USB power source or adapter.
- The product switches on.
- The power indicator LED A 2 burns blue.
Use
1. Select the input port with the input selector switch .
2. Switch on the connected audio devices.
Maintenance
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>