Door Stoppers SJ-MX01 Door Stops with 3M Tapes User Manual
- June 17, 2024
- Door Stoppers
Table of Contents
- CONTACT US
- Product Description
- Two Modes
- Self Adhesive Guide
- Install on Concrete Wall with Screws
- Q: Is there any restriction on the surface?
- Q: How can I remove the 3M stickers if placed or want to reinstall to new
- Q: Are there two modes? How do I choose?
- Q: Can I use the 3M stickers first?
- Q: If the magnet is too strong for my door, what What should I do?
- Q: I am not good at installing, any tips?
- Products
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Door Stoppers SJ-MX01 Door Stops with 3M Tapes User Manual
CONTACT US
Provides a detailed user manual for your better experience, but there may be other detail we didn’t take it into consideration. Please Do contact us immediately if you have any issue or suggestions. promises to offer service: FREE RETURN, FREE REPLACEMENT or FULL REFUND to solve your issue and make you satisfied.
Product Description
magnetic door stop is designed to stop your door, protect the wall from unsightly damage and conveniently hold your door open. Construct- ed of high- quality stainless steel, sturdy and rust-proof. Easy to install with 3M stickers, or use screws for a more permanent mount.
Material | Stainless steel |
---|---|
Applications | Residence, dorm, office, hotel, recreational vehicle, cabinet, |
patio, etc.
Package included| Magnetic door stop, Screw, Anchor, 3M double sided tape,
Bolt nut, User manual
Item weight| 4.65 ounces/unit
Package Quantity| 1,2,4,6 Pack
Two Modes
Wall Mounting
Floor Mountin g
Self Adhesive Guide
Step 1 : Clean all the dust/lint off the surface you want to stick on,
and wait until it dries completely. (Recommend alcohol)
Step 2 : Peel off and stick the 3M tapes to 2 baseplates of the doorstop.
Press the stickers firmly for 1 minute.
Step 3 : Choose the right position and stick part 1 on the floor.
Step 4 : Peel off the outward tape of part 2, push the door to stick on the tape.
Step 5: Complete. Wait for 24 hours before using, the doorstop will work better and longer. (Tip: Wrapped with thick tissue for not working temporarily)
Note : When in sticking, please slowly push and remove the air out. Please line two magnets up connected together to make sure stuck correctly.
Install on Concrete Wall with Screws
Step 1 : Twist part 1 to take out the baseplate.
Step 2 : Drill a hole on the wall with an electric drill, install expansion bolt and tighten nut. Screw Part 1 into the expansion bolt.
Step 3 : Make two magnets connected horizontally, then open the door, mark screw holes on the door.
Step 4 : Drill 3 screws to fix part 2.
Step 6 : Complete.
Note : If installed on a wood baseboard, just drill 3 screws to fix the baseplate, then twist the part 1, no need the expansion bolt. The same way to install on the floor with screws.
FAQ
Q: Is there any restriction on the surface?
A: Yes, the 3M sticker is suitable for flat and dry surface, like PVC surface, metal, wood plank and ceramic tile. To make adhesive work better, please use alcohol to clean all the dust/lint off the surface, and wait until it dries completely. If installed on drywall/cement wall/latex paint wall or any uneven surface, please use screws, otherwise, it will remove the paint.
Q: How can I remove the 3M stickers if placed or want to reinstall to new
house?
A: Take a hair dryer to heat it, it will be removed easily. And if the sticker peeled off, heat it, it will be more sticky after pressing.
Q: Are there two modes? How do I choose?
A: Yes, it can be mounted vertically to the floor or horizontally to the baseboard. When installed on floor, you can choose the max distance between the door and wall. Another point, the magnet is stronger when installed horizontally.
Q: Can I use the 3M stickers first?
A: Sure, easy to install with 3M stickers, or use screws for a more permanent mount. If the 3M stickers didn't work one day, you can install with screws for longer service life.
Q: If the magnet is too strong for my door, what What should I do?
A : To reduce the power of the magnet, you can place a piece of clear tape/electrical tape/felt dot over the magnet.
Q: I am not good at installing, any tips?
magnetic door stop
Products
| | | |
---|---|---|---|---
1 Pack| | | |
2,4,6 Pack| | | |
3M Tapes| | | |
Magnetic| | | |
Soft-Catch| | | |