COSTWAY TQ10007 Benz Scooter Truck User Manual
- June 12, 2024
- COSTWAY
Table of Contents
USER’S MANUAL
Benz scooter (truck)
T Q10007 TQ10008
TQ10007 Benz Scooter Truck
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ
AND KEEP FOR FUTURE REFERENCE.
Please give us a chance to make it right and do better!
Contact our friendly customer service department for help first. Replacements
for missing or damaged parts will be shipped ASAP!
Follow Costway
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: ctus@costway.com
UK: csuk@costway.corn
Before You Start
Please read all instructions carefully and keep It for future reference.
Warnings:
Attention? Use it with protective equipment.
Attention? Not use it in the traffic.
Attention? The product is not suitable for the children under 3 years.
General Warnings:
The product must be installed and used under the supervision of an adult
Read through each step carefully and follow the proper order.
Remove all packaging, separate and count all parts and hardware.
Please ensure that all parts are correctly installed, incorrect installation
can lead to a danger.
We recommend that, where possible, all items are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily
once assembled.
Ensure a secure surface during construction, and place the product always on a
flat, steady and stable surface.
Please use the product carefully, as the product requires great skill, avoid
accidents by the user or others, by fall or collision.
Please wear suitable protective equipment during use, e.g. protective helmet,
gloves, knee pads, elbow pads etc.
Warning:
- Ride-on car is designed for children up 12-36 months old. The rider’s weight must not exceed 25kgs, as there is insufficient strength to support overweight.
- Product is designed to seat 1 child at a time to avoid injuries.
- Parental guidance and supervision are strongly advised to ensure safe riding.
- Adult assembly and installation of all parts are required to ensure safety.
- Batteries to be handled by adults.
- Take care of riding and avoid going near streets, crossroads, all traffic areas, swimming pools, and stairs.
- Without regular check of the product, it will cause overturn or fall.
- Occasionally check to see that the nut and bolt on the steering wheel are tight and secure.
- Dangers may happen if the product is not correctly assembled.
- Shoes must be worn in use.
Battery Handling:
- Battery must be handled by adults only.
- Always remove exhausted batteries.
- Use AA size batteries only.
- Alkaline batteries are recommended.
- Always remove batteries when the unit is not going to be used for an extended period of time.
- When replacing new batteries, always replace all batteries.
- Do not mix old and new batteries.
- Do not mix Alkaline, Standard(Carbon-Zinc),or Rechargeable(Nickel- Cadmium) batteries.
- Do not dispose of batteries in fire, they may explode or leak.
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Batteries are to be inserted with the correct polarity.
- The supply terminals are not to be short-circuited.
COMPONENTS LIST
1| Car Body 1PC|
---|---|---
2| Steering wheel 1PC|
3| Backrest 1PC|
4| Wheel 4PCS|
5| Wheel Cap 4PCS|
6| Anti-tumble Shelf 1PC|
7| Warning light 1PC|
8| J-shaped Stick 1PC|
9| Rear Wheel Axle 1PC|
10| Ring 4PCS|
11| Washer 5PCS (1 replacement piece)|
12| Cotter Pin 4PSC (1 replacement piece)|
INSTRUCTIONS
1. Place the anti-tumble shelf into the rear of the body.| 2. Insert the
rear wheel axle through washer, wheel,
plastic ring into the body, tighten using a cotter pin.| 3. Assemble the two
front wheels, insert the plastic
ring, wheel and washer, tighten using two cotter pins.
4. Place the four wheel caps onto the four wheels.| 5. Install the J-shaped
stick at the assigned location as picture.
6. Loosen the bolt and nut in the steering wheel first, then place the
steering wheel over the J-shaped stick, insert the bolt and tighten the nut
with a screwdriver.| 7. Insert the backrest over the hole in the rear of the
body, be certain the backrest is completely seated.
8. Connect the two wire plugs first, then insert the whole warning light into
the car body.| Trun over the car body, and find the battery house. Loosen the
screws with a screwdriver. Put 2 AA batteries in the battery house, then tight
the screw with a screwdriver.
http://www.costway.com/hysalesrule/qr
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>