lacrosse technology 617-148 WIRELESS CHARGING ALARM CLOCK User Manual

: June 5, 2024
: lacrossetechnology

lacrosse technology 617-148 WIRELESS CHARGING ALARM CLOCK

Initial Setup

Power Up
Insert the 5V Power Adapter into an outlet, and then plug it into the Power Jack on the bottom of the alarm clock.
A greeting will appear on the LCD display and then your clock will move into the Settings Menu.

Settings Menu Order

Language
12/24 Format
Hour
Minutes
Year
Month
Date
Month/Date or Date/Month
Fahrenheit/Celsius

Language:
Whichever language is selected, the following instructions and weekday will be presented in that language.

Weekday:
Weekday will set automatically after year, month, & date settings are adjusted.

Buttons

GLOW: Press to change the Glow Light color. Hold to turn Glow Light off.
SET: Press to change Display Modes. Hold to enter Settings Menu.
ALARM: Press to activate/deactivate or hold to enter alarm settings.
PLUS/MINUS (+/-): Press to increase/decrease Glow Light Brightness. Press to increase/decrease values in Settings Menu, hold to change values quickly.
SNOOZE/BACKLIGHT: Tap to snooze sounding alarm, adjust backlight, or hold for Auto-Dim settings.
RESET: Press to factory reset your clock

LCD Display

Ports

Note: To enter the Settings Menu after the initial setup, hold the SET button on the back of the clock.

LCD Display Brightness

Adjusting the LCD Display Brightness
Press the SNOOZE/BACKLIGHT button on the top of the clock to adjust the backlight intensity. There are 4 brightness levels, plus an off option.

Auto-Dim Settings
Program your LCD display to automatically dim during preselected times.

Hold the SNOOZE/BACKLIGHT button to enter the Auto-Dim Settings Menu.
Press the +/- buttons to turn the Auto-Dim feature on or off. Press SNOOZE/BACKLIGHT to confirm.
Press the +/- buttons to adjust the starting hour. Press SNOOZE/BACKLIGHT to confirm.
Press the +/- buttons to adjust the stopping hour. Press SNOOZE/BACKLIGHT to confirm and exit.

Display Modes

Selecting the Display Mode
Press the SET button on the back of the clock to select a display mode. Clock will stay on selection.

Display Mode Options

Full Weekday & Calendar
Weekday, Month, Date & Indoor Temperature
Full Weekday & Indoor Temperature

Time Alarm

Setting the Alarm

Hold the button on the back of the clock to enter the Alarm Settings Menu.
Use the +/- buttons to set your desired time. Press to confirm.
Next, use the +/- buttons to set your desired snooze duration (5 to 120 minutes). Press to confirm and exit the Alarm Settings Menu.
Your sound alarm is now activated, indicated by the icon on the LCD.

Activating & Deactivating the Alarm

Press the button to activate/deactivate the alarm and to view your alarm time.
The icon will appear on the LCD when the alarm is active.

Ascending Alarm
The alarm will increase in beep frequency over a 2-minute period. After the 2-minute time frame, the alarm will stop if not snoozed or turned off.

Snooze Duration Countdown

When your alarm sounds, Press the SNOOZE/LIGHT button to snooze your alarm for your preselected snooze duration.
A countdown will appear on screen. When the snooze time reaches “0,” the alarm will sound again.

Note: The snooze feature can be repeated as many times as desired.

Glow Light Selection

Select Glow Light Color:

Press the GLOW button to turn on the Glow Light and toggle through the different light options.
Glow Light Color Selection Order:
Cycle | Red | Yellow | Green | Cyan | Dark Blue | Purple | WhitePress the SNOOZE/LIGHT to select an individual solid color. When a single color is selected, it will remain on that color. Select CYCLE to smoothly transition between all of the colors.
Glow Light Brightness
Use the +/- buttons to adjust the Glow Light brightness. It has 4 intensity levels plus an OFF option. Holding the GLOW button will also turn off the Glow Light.

CHARGING

5W Wireless Charger

Charging your Phone

Place your phone on the platform. Your phone should sit flush and centered on the charging pad.
The blue Charging Indicator Light below the LCD will be solid when your phone is successfully charging.
The light will flash slowly if your device is not positioned properly or if your device is not compatible with the wireless charging technology. If this problem persists, try removing any large/bulky cases.

Phone Compatibility
Compatible with all Qi Enabled devices:

iPhone 8 or newer
Galaxy S8 or newer
Galaxy Note 8 or newer

Compatibility may vary based on phone model and/or case selection. This list is not comprehensive. Please check your phone’s manual for details regarding wireless charging capabilities.

Wireless Charging FAQs

Q. Why is the blue light blinking?

A. Phone is not centered on the charging pad.
A. Your phone must be Qi Enabled to charge.
A. If the phone has a large/thick case, it may interfere with charging.
A. Foreign objects on the charging pad will make the light blink.

Q. Why is the table surface getting warm?

A. Ensure the clock is on a hard, clean surface.
A. Do not place on cloth, paper, or other item that may obstruct airflow.
A. Clear dust or other obstructions from the vents on the bottom of the clock.

USB Charging Port

There is a 1 Amp USB Charging Port located on the right side of your alarm clock.\

Connect your external device’s USB charging cable (not included) into the USB Charging Port.
Charging times may vary.
USB Power Output: 1 Amp maximum current

Support

For detailed product videos, manuals, and more, visit our support website: www.lacrossetechnology.com/support
Make sure to have your model number handy (617-148).
If you need additional support, get in touch with our friendly customer support team: Online: bit.ly/contact_techsupport
Phone Number: 1.608.782.1610 Representatives are available Monday-Friday 8:00am to 6:00 pm CST.

La Crosse Technology Is not responsible for any damage or loss of performance with iPhone, iPod, or iPad while being used In associated with this accessory.
Apple Is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note the use of this accessory with I IPhone. I Pod, or I Pad
may affect wireless performance.
Apple, the Apple logo, iPad, iPhone, iPod, iPod touch, ITunes, Retina, Mac, Mac OS and OS X are trademarks of Apple Inc., registered In the U.S. and other countries.
Other company names and product names including Samsung, Galaxy, and Note are registered trademarks or of the respective companies

Phone charging accessories not included.
WARNING: CHOKING HAZARD-Small Parts Not for children under 3 yrs.

Stay in Touch: Ask questions. watch set up videos. and provide feedback on our social media outlets.

Specifications

Power Requirements: 5.0V Power Cord (Included)

HX13-0502500-AU-001
The plug on the power adapter is intended to serve as the disconnect device, the socket-outlet shall be installed near the equipment and shall be easily accessible.

LCD Brightness: 4 Intensity Levels + OFF (Programmable Auto-Dim Backlight Option)
Glow Light Brightness: 4 Intensity Levels + OFF Programmable Snooze Duration: 5 to 120 Minutes
Indoor Temperature Range: 32°F to 99°F (0°C to 37°C)
Wireless Charger Power Output: 5 Watts
USB Charging Port: 1 Amp Maximum Current (Charging Cord Not Included)
Settings Backup: The time and alarm settings will be saved for 3 minutes in the event it loses power. Full battery backup for extended times is not available.
Dimensions: 4.97” L x 5.34” W x 2.85” H (12.62 cm L x 13.56 cm W x 7.24 cm H)
Factory Reset: If you’re experiencing issues with your clock, use a pen or paper clip to press the factory RESET button on the back of your clock.

California Residents

WARNING:

This product can expose you to chemicals including styrene, which is known in the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov

Warranty

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product, relating to manufacturing defects in materials and workmanship.
For full warranty details, you can visit: www.lacrossetechnology.com/support
La Crosse Technology, Ltd • 2830 S. 26th Street • La Crosse, WI 54601

Recycling & Disposal

Please consider the environment when deciding to dispose of this product. Although household electronics are generally safe to use on a daily basis, incorrect disposal can cause negative and potentially irreversible impacts on our environment.
Check with local donation centers to see if your product can be donated for future use. If disposal is the only option, federal agencies, local governments, and certified retailers may have electronic recycling programs in place. Programs may vary based on location.

Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications
to this equipment. Such changes or modifications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included
in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences. All trademarks and patents are recognized.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no- collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The interference potential of the device could cause the interference to the system whose fundamental is 120 KHz to130 KHz.
This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Increase the separation between the equipment and any other radio device.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

The device prevents from using with damping environment. Use only in according with described instruction in order not to damage the device.