Nedis VCON3452AT HDMI Converter User Manual
- June 5, 2024
- nedis
Table of Contents
VCON3452AT HDMI Converter
User Manual
Preface
Thank you for purchasing the Nedis VCON3452AT.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
The VCON3452AT is an HDMI and SCART to HDMI and coaxial audio converter.
Intended use
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
HDMI Converter
---|---
Article number
|
VCON3452AT
Dimensions (l x w x h)
|
108 x 100 x 25 mm
HDMI input
|
1080p @ 60 Hz
1080i @ 60 Hz
480i / 576i / 480p / 576p / 720p @ 60 Hz
SCART input
|
PAL
NTSC-M
NTSC4.43
SECAM
PAL-M
PAL-N
HDMI output
|
1080p @ 60 Hz
720p @ 60 Hz
Audio output
|
Digital coaxial
Analog stereo
Power supply
|
5 VDC
Main parts (image A)
A
1. Power indicator LED
2. HDMI output
3. Audio output
4. Coaxial output
5. SCART / HD button
6. 720p / 1080p button
7. PAL / NTSC button
8. HDMI input
9. SCART input
10. Power supply port
11. Power cable
Safety instructions
WARNING
- Only use the product as described in this manual.
- Do not use a damaged product.
- Do not expose the product to direct sunlight, naked flames or heat.
- Do not expose the product to water or moisture.
- Place the product on a stable and flat surface.
- Do not drop the product and avoid bumping.
- Do not open the product.
- Keep the product out of reach from children.
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Connecting the product
1. Plug an HDMI cable (not included) from your source device into A 8.
- Or: plug a SCART cable (not included) from your video source into A 9.
2. Plug another HDMI cable (not included) from A 2 into a display.
3. Plug a 3.5 mm audio cable from your speakers into A 3.
- Or: plug a coax cable from your stereo installation into A 4.
4. Plug A w into A q.
5. Plug the other end of A w into a power outlet.
- A 1 lights up.
Use
1. Press A 5 to switch between HDMI or SCART input.
2. Press A 6 to switch the resolution between 720p or 1080p.
3. Press A 7 to switch the frequency between 50 Hz or 60 Hz.
Maintenance
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>