Nedis WIFILX50RGB Wi-Fi Smart String of Lights User Manual
- June 5, 2024
- nedis
Table of Contents
WIFILX50RGB Wi-Fi Smart String of Lights
User Manual
Preface
Thank you for purchasing the Nedis WIFILX50RGB.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
This product is a USB-powered string of lights, intended for lighting indoor environments.
The product is intended for indoor use only.
Do not let persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge of how to operate, use the product.
Children should be supervised to ensure that they do not play with the product.
This product is not intended to be operated by means of an external timer or a separate remote control system.
This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
Wi-Fi Smart String of Lights
---|---
Article number
|
WIFILX50RGB
Controller dimensions (l x w x h)
|
60 x 33 x 16 mm
Power input
|
5.0 VDC ; 1 A
FM frequency range
|
2412 – 2472 MHz
Maximum transmission power
|
-92 dBm
Weight
|
145g
Cable length
|
100 cm
String of lights length
|
500 cm
Main parts (image A)
A
1. USB power cable
2. Power button
3. Colour button
4. Music button
5. Microphone
6. Control unit
7. LED strip
Safety instructions
|
Do not use the product where splashing of water might occur, e.g. bathroom, swimming pool or close to a washbowl.
---|---
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- Do not expose the product to water or moisture.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- The surfaces of the product get hot during use.
- Keep the product and power cable out of reach of children under 8 years of age.
- Only use the provided power cable.
Explanation of the safety symbols on the product
Icon
|
Description
---|---
|
Indication to explain that the product should not be used in a bathtub, shower, or water-filled reservoir.
Explanation of the symbols on the product or packaging
Icon
|
Description
---|---
|
Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.
|
Indication to explain the product is suitable for indoor use only.
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Installing the Nedis SmartLife app
1. Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your mobile phone number or your e-mail address and tap Continue.
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with and tap Done.
Installing the product
1. Connect the USB cable A1 to a USB power adapter (not included).
2. The light strip starts flashing quickly.
- Hold the power button A2 for 5 seconds to reset the product if the light strip does not flashes quickly.
3. Tap + in the Nedis SmartLife app.
4. Select ‘LED strip’ from the list of available products.
5. Tap to confirm.
6. Enter the password of the 2,4 GHz Wi-Fi network to which your phone is connected and tap Confirm.
7. Rename the product after it has been found and added.
If the above connection method fails, the product can be connected using AP mode:
1. Press and hold A2 for 5 seconds.
- A7 flashes quickly.
2. Press and hold A2 again for 5 seconds.
- A7 flashes slowly.
3. Tap + in the Nedis SmartLife app.
4. Under Add Manually , tap LED strip.
5. Tap AP Mode in the top right corner.
6. Follow steps 5 till 7 of the regular connection method.
Use
Using the product
- The product can be controlled with the Nedis SmartLife app via a Wi-Fi connection from any location.
- The home menu of the Nedis SmartLife app shows a control tile for each connected lamp and/or group.
- Press the power button A2 to switch on the product.
- Press A4 to enter Music mode.
- The microphone A5 changes the light colour when it detects sound.
- Press A3 to change the colour of A7.
- Press A2 to switch the product off.
Maintenance
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product WIFILX50RGB from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>