Nedis KAPC100SS Party Cooler User Manual

June 5, 2024
nedis

Nedis KAPC100SS Party Cooler

Nedis KAPC100SS Party Cooler

User Manual

Preface

 Thank you for purchasing the Nedis KAPC100SS.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

 The Nedis KAPC100SS is a mobile cooler for beverages.

Intended use

The product is not intended for professional use.

Any modification of the product may have consequences for safety, warranty and proper functioning.

The product is intended for indoor use only.

Specifications

Product

|

Party Cooler

---|---

Article number

|

KAPC100SS

Dimensions (l x w x h)

|

51 x 51 x 826 mm

Power supply

|

220-240 VAC ~ 50 Hz / 0.3 A

Cooling temperature

|

0 °C – 16 °C

Weight

|

22.7 kg (A+)

23.3 kg (A++)

Operating temperature

|

~43 °C

Climatic class

|

SN / N / ST

Refrigerant

|

R600a / 27 g

Insulating gas

|

Cyclopentane (C5H10)

Main parts (image A)

A

1. Lid


2. Basket

3. Thermostat button

4. Display

5. Power button

6. Wheels

Safety instructions

WARNING

  • Read the instructions before use.
  • Only use the product as described in this manual.
  • Close supervision is necessary when the product is used by or near children, animals or infirm persons. Do not allow children to play with it or touch it.
  • Do not unplug the power supply by pulling on the cable. Always grasp the plug and pull.
  • Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
  • Do not block ventilation openings and make sure that there is enough space around the product.
  • Do not use mechanical products or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
  • Do not puncture or heat any part of the refrigerant circuit.
  • Do not use electrical products inside the food storage compartment, unless recommended by the manufacturer.
  • Do not store explosive substances, such as aerosol cans, with a flammable propellant in this product.
  • This product is intended to be used in household and similar applications such as kitchen areas.
  • Make sure the power cable is not trapped or damaged.
  • Do not place multiple portable power outlets behind the product.
  • Before cleaning or moving, switch off the product and disconnect the power.
  • Do not operate the product in the presence of explosive fumes.
  • Connect to a grounded outlet only.
  • When using an extension cord, use one that is as short as possible, fully extended, 1.5 mm2 size, approved.
  • Do not use the product where splashing of water might occur, e.g. bathroom, swimming pool or close to a washbowl.
  • Do not expose the product to direct sunlight, naked flames or heat.
  • Do not expose the product to water or moisture.
  • The product is intended for indoor use only.
  • Store the unit indoors.

Product labels

|

Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.

---|---

|

Indication to explain that the product:

contains one or more (extremely/highly) flammable components;

|

Indication to explain the product is suitable for indoor use only.

|

Indication to explain that the product can be recycled.

|

Product in which protection against electric shock does not rely on basic insulation only, but which includes an additional safety precaution in such a way that means are provided for the connection of conductive parts (which are not live parts) to the protective (earthing) conductor in the fixed wiring in such a way that these parts cannot become live in the event of a failure of the basic insulation.

Installing the product

  • Place the product on a stable and flat surface.

1. Clean the product with a damp cloth.

  • Dry thoroughly before use.
  • If the product has been tilted, allow it to stand upright for 20 to 30 minutes before plugging it in.

2. Plug the power plug in a working power outlet.

3. Press  A 5 to turn on the product.

4. Press  A 3 to adjust the cooling temperature.

  • A 4 flashes during the adjustment.
  • The temperature in the product depends on the temperature in the surrounding area, the contents of the product and how often and how long the lid is opened.
  • For better cooling, keep the lid closed.

Maintenance

  •  Always disconnect the product from the power outlet when cleaning or moving the product.
  • Do not use harsh chemicals.

1. Remove the contents of the product.

2. Clean the product with a damp cloth.

  • Use vinegar to prevent mold and fungus.

3. Clean  A 12 with lukewarm water and mild detergent.

  • Wipe all parts thoroughly after cleaning.

4. Turn the slits in the rubber strip downward when assembling  A 1.

  • When the product is not in use, it must be completely dry inside to avoid mold growth.
  • Preferably leave  A 1 open.

Warranty

 Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

Disclaimer

 Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals