Nedis INKI112CBK16 Insect Killer User Manual
- June 5, 2024
- nedis
Table of Contents
INKI112CBK16 Insect Killer
User Manual
Preface
Thank you for purchasing the Nedis INKI112CBK16.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
- The Nedis INKI112CBK16 is an electronic insect killer.
- It utilizes a UV-A LED tube to attract light sensitive flying insects, such as flies, moths, and mosquitoes.
- These insects are electrocuted by the electrically charged inner metal grid.
- The product is intended for indoor, domestic use only.
- Keep the product out of reach from children.
- Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
Insect Killer
---|---
Article number
|
INKI112CBK16
Grid voltage
|
4000 V
Input voltage
|
AC 220 – 240 V / 50 / 60 Hz
Lamp
|
UV-A LED
Power
|
11 W
Lifespan
|
± 20000 hours
Effective range
|
150 m2
Cable length
|
1 m
Main parts (image A)
A
1. Chain
2. Housing
3. Metal grid
4. Power cable
5. Tray
Safety instructions
WARNING
- Only use the product as described in this manual.
- Read the manual carefully before use. Keep the manual for future reference.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not open the product.
- High voltage! Do not touch the inner metal grid.
- Do not look directly into the light, this may cause eye damage.
- Never put metal objects inside the grid.
- Keep distance from flammable objects.
- Keep away from flammable gases, vapor or explosive dust.
- Do not use the product in barns, stables and similar locations.
- Do not expose the product to water or moisture.
- Always disconnect the product from the power outlet before cleaning or moving the product.
- Do not drop the product and avoid bumping.
- Do not use the product for more than 8 hours a day, due to the radiation.
- Keep the product out of reach from children.
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Installing the product
1. Hang the product to the ceiling with the chain A 1.
2. Connect the power cable A 4 to a power outlet.
Maintenance
- Always disconnect the product from the power outlet before cleaning or moving the product.
- Clean the outside of the product with a soft, clean, lightly damp cloth.
- Empty the tray A 5 at least once a week.
- The LED lamp cannot be replaced.
- Do not use cleaning solvents or abrasives.
- Do not attempt to repair the product. If the product does not operate correctly, replace it with a new product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---