Nedis PASH120BKA4 Paper Shredder User Manual
- June 5, 2024
- nedis
Table of Contents
PASH120BKA4 Paper Shredder
User Manual
Preface
Thank you for purchasing the Nedis PASH120BKA4.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
The Nedis PASH120BKA4 is intended to cut up to 6 sheets of A4-size paper into strips or fine particles at once.
This product is not intended to shred cardboard or thick paper sheets.
This product is intended for indoor use only.
This product is not intended for use by persons (including children) with a reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the product by a person responsible for their safety.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
Paper Shredder
---|---
Article number
|
PASH120BKA4
Dimensions (l x w x h)
|
325 x 170 x 322 mm
Weight
|
3260 g
Power supply
|
220 – 240 VAC / 50/60 Hz
Power input
|
1.4 A
Power consumption
|
300 W
Operating cycle
|
2 minutes on / 60 min off
Cutting style
|
Cross cut
Entry width
|
220 mm
Shred capacity
|
6 sheets of 80 g of paper size A4
Main parts (image A)
A
1. Control slider
2. Paper entry
3. Shredder
4. Carrying handle
5. Container
6. Power cable
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
- Only use the product as described in this document. Any other use may cause (serious) injuries.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Ensure that there is sufficient light when installing and using the product.
- Position the product close to a power outlet, so the power cable can be unplugged easily.
- Make sure the power cable is positioned in a way that prevents tripping or falling.
- Unplug the product from the power source and other equipment if problems occur.
- Do not unplug the charger by pulling on the cable. Always grasp the plug and pull.
- Connect to a grounded outlet only.
- Do not let the power cable touch hot surfaces.
- Do not expose the product to direct sunlight, naked flames or heat.
- Do not expose the product to water or moisture.
- Do not immerse the product in water or other liquids.
- Do not use the product if the surface is cracked.
- Place the product on a stable and flat surface.
- Do not overfill the container. Empty the container before using the product again.
- Be careful when handling the blades.
- Keep away from the paper entry to avoid cutting injuries.
- Keep clothing, necklaces, bracelets, loose hair and any other object that can get stuck away from the paper entry.
- Do not insert explosive materials, metal objects, or any other foreign objects that can lead to hazardous situations.
- Before cleaning and maintenance, switch off the product and disconnect the power.
- When the product is not in use, disconnect it and store in a safe, dry place, out of reach from children.
- Keep the product out of reach from children, infirm persons or animals.
- Do not let pets or children play too close to the product.
- This product is not a toy. Never allow children or pets to play with this product.
- Children should be supervised to ensure that they do not play with the product.
- Do not move the product during operation.
- Do not use a damaged or defective product, but return it for repair or replacement.
Safety symbols on the product
Icon
|
Description
---|---
|
Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.
|
Indication to explain that the product needs to be collected separately when disposed. Do not throw in the trash bin.
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Installing the product
1. Place the product on a stable and flat surface.
2. Connect the power cable A 6 to a power outlet.
Use
Using the product
1. Slide the control slider A 1 to AUTO.
- Standby mode is activated.
2. Insert max. 6 A4-size sheets of paper vertically into the paper entry A 2 at once.
- The product detects the paper and starts shredding.
- Do not hold on to the paper when it is being shredded.
- After shredding, the product returns to the standby mode automatically.
Reversing the product
When paper is jammed in the shredder A 3, you can reverse the shredder blades to remove the paper.
1. Slide A 1 to REV.
- The product starts to reverse the running for 1 second.
- A 1 slides to OFF.
2. Slide A 1 to AUTO.
3. Insert max. 6 A4-size sheets of paper vertically into A 2 at once.
Troubleshooting
Problem
|
Possible cause
|
Solution
---|---|---
The product is switched on, but the paper cannot be shredded.
|
There is too much cut paper into the container A 5. The paper cannot fall down and stays at A 2.
|
1.Disconnect the product.
2.Remove A 3 from A 5.
3.Empty A 5 above a dust bin.
Paper is stuck in A 2 and the product will not shred it further.
|
a. The slots of the blades tighten the cut paper.
b. The shred capacity is higher than the limitation of 6 sheets of A4 paper size.
c. The motor is overheated.
|
1.Slide A 1 to REV. __
- Remove the leftover papers from A 2.
If steps 1 and 2 did not give a result:
3.Disconnect the product.
4.Allow the product to cool down for at least 60 min.
The product does not work after placing scrapped paper.
|
The product will automatically be locked after inserting scrapped paper.
|
Slide A 1 to REV. __
The product does not start after inserting a sheet of paper or stops running when paper is being inserted.
|
The paper is too thin, soft, damped, wrinkled, or curled.
|
1.Fold the paper.
2.Insert the paper into A 2.
Prolonged use of the product causes the product to heat up internally. The built-in overheating protection switches off the product to prevent any damage.
After using the product for 2 minutes, allow the product to cool down for at least 60 minutes before using the product again.
Maintenance
- Before cleaning and maintenance, switch off the product and disconnect the power.
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
- Mind the cutting blades during cleaning.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>