SALTO IQ2 Ethernet and USB Stick Cellular For APAC Instructions

SALTO IQ2 Ethernet and USB Stick Cellular For APAC

Product Information

• Product Description: SALTO Systems product
• Product Name: IQ212, IQ213, IQ214, IQ222, IQ223, IQ224
• Technology: Bluetooth LE, WiFi, IEEE802.15.4
• Power Supply: 12V, PoE (Power over Ethernet)
• Control Software: CCCPROD
• RF2 Module: CCCPROD
• Bluetooth LE Module: Not specified

Product Usage Instructions

Electrical Warnings

• This device must be powered by a power supply classified ES1 and PS2 according to IEC/EN/UL/62368-1 & AS/NZS 62368.1.
• The distance between this device and the human body must be higher than 20 cm.

Frequency / Output Maximum Power

• Bluetooth LE: +6 dBm
• IEEE802.15.4: +5 dBm
• WiFi: +17 dBm

Mechanical Warnings
The environmental conditions mentioned in the data sheets are always referred to as non-condensation situations. The SALTO product should be treated with care during the installation process to avoid any aggressive contact that may damage the unit. If you have questions or doubts about this, please contact your authorized SALTOsupplier.

Compliance

• EU Compliance Statement
• UKCA Declaration of Conformity

Legal Warnings

• FCC Compliance Statement
• ISED Compliance Statement
• IMDA Compliance Label

All contents are current at the time of publication. SALTO Systems S.L. reserves the right to change the availability of any item in this catalog, its design, construction, and/or materials.
For more information, please visit the SALTO Systems website.

PRODUCTS DESCRIPTION

BLUETOOTH LE

MODULE

IQ2.0

| IQ212| x| x|  | x|  | CCCPROD|  | –
IQ213| x|  |  | x| x| CCCPROD|  | –
IQ214| x|  |  | x|  | CCCPROD|  | –
IQ222| x| x| x| x|  | CCCPROD| 0091| –
IQ223| x|  | x| x| x| CCCPROD| 0091| –
IQ224| x|  | x| x|  | CCCPROD| 0091| –

COMPLIANCE STATEMENT

Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS). You will be able to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate

UKCA DECLARATION OF CONFORMITY

Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 and RoHS Regulation 2012. You will be able to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate

UK importer contact information:
Salto Systems, Ltd. Unit 1, The Court Holywell Business Park, Northfield Road, CV47 0FS Southam, UK.

ELECTRICAL WARNINGS

• This device must be powered by a power supply classified ES1 and PS2 according to IEC/EN/UL/ 62368-1 & AS/NZS 62368.1.
• The distance between this device and the human body must be higher than 20 cm.

FREQUENCY / OUTPUT MAXIMUM POWER

MECHANICAL WARNINGS

The environmental conditions mentioned in the data sheets are always referred to as non-condensation situations. The SALTO product should be treated with care during the installation process to avoid any aggressive contact that may damage the unit. If you have questions or doubts on this, please contact your authorized SALTO supplier.

LEGAL WARNINGS

The user shall be responsible for the correct use and maintenance of the access control equipment according to the instructions herein. SALTO shall not be responsible for any defect, malfunction, loss or damage, whether direct or indirect, caused by or arising from any improper installation or utilization of the equipment or which contravenes, transgresses or infringes in any manner the above-mentioned instructions. SALTO’s liability concerning the equipment is limited to the warranty provided. The warranty does not cover product failures due to repairs, modifications or product manipulations performed in the access control equipment or in the inner electromechanical structure by anyone other than authorized SALTO dealers or personnel.

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This product is a radio transmitter and receiver to be used in mobile conditions.

Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
We, SALTO Systems, S.L., hereby declare that the equipment bearing the model number specified above was tested conforming to the applicable FCC Rules. Responsible Party – U.S. Contact Information
Salto Systems Inc. USA
1780 Corporate Drive, Suite 400
Norcross, GA
30093
[email protected]

ISED COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Distance between 10088A-IQ2 and the human body must be higher than 20 cm.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to ICES-003.

IMDA COMPLIANCE LABEL

SALTO SYSTEMS S.L. www.saltosystems.com
All contents are current at the time of publication. SALTO Systems S.L. reserves the right to change the availability of any item in this catalog, its design, construction, and/or materials.

References

• saltosystems.com
• Products | Salto Systems

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>