BENCHDOGS TD-020 Quad Dogs Multi Quad Bench Instruction Manual

BENCHDOGS TD-020 Quad Dogs Multi Quad Bench

WHAT’S IN THE KIT

• 1 x Quad Base
• 1 x Dog

Whichever size dog you need you will also need a quad dog base. These instructions apply for every size dog we make. We are using a 60mm dog for the purposes of demonstration.

Steps

1. Put the base together as shown.
2. Screw the dog onto the base not too tightly.
3. Push the Quad Dog through your MFT hole and tighten as much as possible. The Quad Dog should now be tight and secure in place.

FOR MORE INFORMATION PLEASE VISIT

[email protected]
WWW.BENCHDOGS.CO.UK 

References

• Bench Dogs, Precision Woodworking Tools and MFT Accessories – Benchdog Tools

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>