lionelo Thermup Go Portable bottle warmer User Manual
- June 5, 2024
- lionelo
Table of Contents
lionelo Thermup Go Portable bottle warmer
IMPORTANT
Please read this manual before you start using the product to see its functions and use it in accordance with intended use. A failure to follow the safety instructions and use at variance with the manual may lead to injuries.
Keep this manual for future reference.
- Do not repair or modify this product on your own. Only an authorized service technician is allowed to perform these operations.
- This product is not a toy. Do not let children play with it. Keep the product out of reach of children.
- Keep the product away from sharp edges and sources of heat and moisture. The product must not be exposed to direct sunlight. Do not let the product overheat.
- Do not immerse the product or power cable in water or other liquids. Before use, make sure the product is dry.
- Do not warm up a bottle if it is empty.
- Do not use the USB cable for other purposes than designed.
- Use the source of power 5V ⎓ 2A only.
- Do not connect the product to the source of power if there is no bottle with liquid. The bottle must contain at least 60 ml of liquid.
Parts list
- Velcros
- Handle
- Temperature sensor unit
- USB-C cable
Operating manual
-
Pour boiled water into the bottle and then tightly fasten sleeve Velcros.
-
USB cable must be connected to the sleeve and source of power (charger/power bank/ USB port in the car).
-
Temperature sensor:
-
Flashing red light
temperature is too low (below 40°C), -
Steady green light
temperature is 40°C ~ 45°C, suitable for the child, -
Steady red light
temperature is too high (above 45°C).
-
How to clean and maintain
- After every use and before cleaning, unplug the product. Before you start cleaning, wait for the product to cool down.
- Clean the sleeve; to do so, wipe it with a wet cloth or paper towel. Do not clean the sleeve under running water.
- Do not use strong cleaning agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>