anslut 012676 Electric Bathroom Fan Instruction Manual
- June 5, 2024
- anslut
Table of Contents
anslut 012676 Electric Bathroom Fan Instruction Manual
SAFETY INSTRUCTIONS
- Disconnect the product from the mains before connecting, maintenance and/or repair.
- Installation, maintenance and/or repairs should be carried out by an authorised electrician and in accordance with these instructions.
- The product is intended to be connected to 230 V 1-phase installations that comply with local regulations.
- The product must be connected via a permanently installed automatic fuse with a minimum contact gap of 3 mm on all terminals.
- Check before installation that the impeller and casing are undamaged.
- There must be no foreign objects in the casing that could damage the fan blades.
- The product must only be used for its intended purpose and in accordance with these instructions. Do not make any modifications to the product.
- The product is not intended to be used by persons (children or adults) with any form of functional disorders, or by persons who do not have sufficient experience or knowledge on how to use it, unless they have received instructions concerning the use of the product from someone who is responsible for their safety.
- Keep children under supervision to make sure they do not play with the product.
- Take the necessary precautions to prevent smoke, carbon monoxide and other flammable products from penetratinq into the room through open flues or other fire safety devices.
- Make sure that the air supply is sufficient for correct combustion and adequate chimney draught, to prevent backward how.
- The transported medium must not contain dust or other solid particles, sticky substances or fibres.
- Do not use the product in explosive environments, e.q. in the vicinity of flammable liquids, gas or dust, or in environments that contain toxic or harmful substances.
- Do not block the openings on the product to attempt to direct or a*iust the airflow.
- The product is intended for permanent connection to the mains.
SYMBOLS
| Read the instructions.
---|---
| Safety class II
| Approved in accordance with
the relevant directives.
| Recycle end-of-life product in accordance with local regulations.
TECHNICAL DATA
Voltage: 230 V 50 Hz
Output: 14 W
Air how: 95 m’/h
Speed: 2300 rpm
Noise level: 33 dB
Safety class: II
Protection rating: IP24
Operating temperature: +1 to 40”C
Size: Size 136x117x98mm
Care for the environment!
Recycle discarded product in accordance with local regulations
Jula reserves the right to make changes. For latest version of operating instructions, see www.juIa.com
JULAAB, BOX363, SE532 24 SKARA
2022-03-30
0 uaAB
Read User Manual Online (PDF format)
Loading......