anslut 016921 LED Light Net Instruction Manual

October 27, 2023
anslut

anslut-016921-LED-Light-Net-LOGO

anslut 016921 LED Light Net

anslut-016921-LED-Light-Net-PRODUCT

OPERATING INSTRUCTIONS

Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions)

Care for the environment

Must not be discarded with household waste! This product contains electrical or electronic components that should be recycled. Leave the product for recycling at the designated station e.g. the local authority’s recycling station.

Jula reserves the right to make changes. In the event of problems, please contact our customer service. www.jula.comanslut-016921-LED-Light-Net-
FIG-1

SAFETY INSTRUCTIONS

  • Do not connect the product to a power point while the product is still in the pack.
  • Intended for indoor and outdoor use.
  • Check that no light sources are damaged.
  • Do not connect two or more string lights together electrically.
  • No parts of the product can be replaced, or repaired. The whole product must be discarded if any part is damaged.
  • Do not use sharp or pointed objects during assembly.
  • Do not subject the power cord or wires to mechanical stress.
  • Do not hang objects on the string light.
  • This is not a toy. Be careful if using the product near children.
  • Disconnect the transformer from the power point when the product is not in use.
  • This product must only be used together with the supplied transformer and must never be connected directly to the mains supply without a transformer.
  • The product is not intended to be used as general lighting.
  • Recycle products that have reached the end of their useful life according to local regulations.
  •  WARNING! The product must only be used when all the seals are correctly fitted.

Symbols

  • Read the instructions.
  • Safety class III.
  • Approved in accordance with the relevant directives.
  • Recycle discarded product in accordance with local regulations.

TECHNICAL DATA

  • Rated input voltage 230 V ~ 50
  • Rated output Hz 31
  • voltage VDC
  • Output No. of LEDs 6 W
  • Safety class 480 III
  • Protection rating IP44

HOW TO USE

POSITIONING

  1.  Remove the product from the packaging.
  2.  Place the product in the required location.
  3.  Connect the transformer to the mains.

HOW TO USE

  1. Connect the transformer to the mains.
  2. Press the transformer button to switch between the 8 light modes.

Light modes

1| Combination
2| Waves
3| Sequential
4| Slow-glow
5| Running light/flashes
6| Slow fading
7| Twinkling/flashes
8| Constant

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

anslut User Manuals

Related Manuals