beper BP.790 Electric Knife Instruction Manual
- June 3, 2024
- beper
Table of Contents
beper BP.790 Electric Knife Instruction Manual
Precautions
Read the following instructions carefully, since they give you useful
safety information about installation, use and maintenance and help you avoid
mishaps and possible accidents.
Remove the packing and make sure that the appliance is intact, with special
attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be
accessible to the children, in order to preserve them from danger sources.
It is recommended not to throw these packing material in the domestic waste,
but to deliver them to the appropriate station of collection or destruction
refusals, asking eventually information to the manager of the Sanitation
Department of your own municipality.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds
to the data specified on the label.
The appliance can be damaged if the voltage is not correct.
If the plug does not suit the socket, let it be replaced with another suitable
plug by qualified personnel only, which shall also ensure that the section of
the socket cables is suitable for your appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not
recommended; should they be necessary, please use only simple or multiple
adaptors and extensions in compliance with the safety rules in force, making
sure that the capacity absorption limit marked on the simple adaptors and the
extensions and the maximum power limit marked on the multiple adaptor are not
exceeded.
Do not use the appliance if the cable or the plug shows any damages.
Do not use the appliance after a possible irregular working. In this case,
switch it off and do not break it open. Refer to an authorized Beper after-
sale service for repair and require original spare parts only. Failing to
follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is
to be considered as improper and thus dangerous. The manufacturer cannot be
responsible for any damages deriving from improper, wrong or incautious use.
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any parts of
the appliance into water or other fluids. Do not use the appliance near
explosives, highly flammable materials, gases or burning flames.
Do not allow children, disabled people or every people without experience
or technical ability to use the appliance if they are not properly watched
over. Close supervision is necessary when any appliance used by or near
children.
Use advice
Use the electric knife on a stable work surface.
Do not rest and do not use the electric knife on a hot plate or near naked
flame (gas cooker).
Do not immerse the electric knife in water or other liquid; avoid splashes of
water.
Do not expose the electric knife to moisture. In case some liquid penetrate
into the body of the electric knife, immediately unplug the cable rom the
electrical socket and let the electric knife repaired by qualified personnel.
Take the power cord away from the blades during use.
Never put your fingers or other objects in the blades of the electric knife
during operation.
Do not use the electric knife continuously for more than 15 minutes.
Disconnect the electric knife from the electrical socket after use.
Make sure that the electric knife is disconnected from the power outlet before
removing the blades and before cleaning.
Product description Fig. A
- Rivet of the blade
- Detachable steel blades
- Blade holder and protection
- Blade insertion hole
- Blades ejection button
- Safety switch
- On / off button
Use instructions
Insert the blades Fig. B-C
Join the blades using the rivet. Handle the blades very carefully. By placing
the fingers on the blade holder and protection, gently insert the blades in
the blade insertion hole and push until the click to lock them
Caution: the blades are very sharp, take extreme care when handling them.
Operation
Connect the power cord to the electrical outlet.
Press the safety switch and the on / off button to operate the electric knife.
Place the blades on the food to be cut by pressing. Start to cut firmly from
the crust.
The blades remain parallel to the cutting surface.
At the end, release the safety switch and the on / off button.
Disengining the blades Fig. D
Unplug the power cord from the electrical outlet.
Press the blade ejection button and pull the blades to remove them.
Be very careful, the blades are very sharp.
Cleaning the electric knife
Before cleaning the electric knife, unplug the appliance from the electrical
socket.
Clean the body of the electric knife with a damp cloth and dry it thoroughly.
Do not immerse the body in water and do not keep it under running water.
Grasp the two blades from the non-sharpened end, separate them by pulling out
the rivet. Wash them with hot water and dishwashing detergent, being very
careful.
Then hang up the blades and place the blades in the protective bag.
Technical data
Power: | 150W |
---|---|
Power supply: | 230V ~ 50Hz |
For any improvement reasons, Beper reserves the right to modify or improve
the product without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances must not
be disposed of in the normal unsorted municipal waste stream. Old appliances
must be collected separately in order to optimize the recovery and recycling
of the materials they contain, and reduce the impact on human health and the
environment.
The crossed out “wheeled bin” symbol on the product reminds you of your
obligation, that when you dispose of the appliance, it must be separately
collected.
GUARANTEE CERTIFICATE
If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs
of use in consumable products (such as lamps, batteries, heating elements…)
the aesthetic parts are excluded from the guarantee, and any defect whatsoever
resulting from non-respect of the rules for use, negligence in usage and/or
maintenance of the appliance, carelessness, wrong or improper installation,
damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the
appliance will be replaced free of charge. In any case, if the part to be
replaced for defect, breakage or malfunction is an accessory and/or a
detachable part of the product, Beper reserves the right to replace only the
very part in question and not the entire product Contact your distributor in
your country or after sales department Beper.
E-mail assistenza@beper.com which will
forward your enquiries to your distributor.
CUSTOMER CARE BEPER
BEPER SRL
Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona
Tel. 045/7134674 – Fax 045/6984019
beper.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>