Turbosound TBV123-AN Arrayable 2 Way 12 Inch Constant Curvature Loudspeaker User Guide

Turbosound TBV123-AN Arrayable 2 Way 12 Inch Constant Curvature

Loudspeaker

Important Safety Instructions

• Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock.
• Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
• This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
• This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

Caution

To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.

Caution

To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution

These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

•  Read these instructions.
•  Keep these instructions.
•  Heed all warnings.
•  Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat
•  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
•  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
•  Use only attachments/accessories specified by the manufacturer.
•  Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
•  Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
•  The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
•  Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable
•  Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
•  Do not install in a confined space, such as a book case or similar unit.
•  Do not place naked flame sources, such as lighted candles, on the apparatus.
•  Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
•  This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/pages/support#warranty

Thank you

Thank you for choosing a Turbosound loudspeaker product for your application. If you would like further information about this or any other product, please visit our website at turbosound.com.

Controls

1.  PROCESS button steps through the DSP processing modules.
2.  LCD SCREEN displays the current DSP module and parameter settings.
3.  SETUP button steps through parameters within DSP processing modules.
4.  EXIT button returns to the top-level DSP screen when pressed.
5.  ENTER button saves changes and deactivates Edit mode when pressed.
6.  ENCODER KNOB toggles between Graphic and Edit modes (when pressed) and changes parameter values (when rotated).
7.  USB connection enables firmware updates and remote control over parameters via computer.
   • Please visit turbosound.com to download DSP control software for your computer.
8. AUDIO INPUT combo jack accepts input signals using XLR, balanced ¼” TRS or unbalanced ¼” TS connectors.
9.  AUDIO LINK XLR connector provides an unprocessed copy of the AUDIO INPUT signal.
10.  ULTRANET IN RJ45/Neutrik etherCON jack for connection to additional ULTRANET-equipped devices.
11.  ULTRANET THRU sends out unprocessed digital audio from the ULTRANET IN connector to additional ULTRANET-equipped devices.
12.  AC LINK OUTPUT provides power link connections to other TBV123-AN or TBV118L-AN loudspeakers.
13.  AC INPUT accepts power connections from power cables fitted with Neutrik powerCON twist-locking connectors.
14.  POWER switch turns the unit on and off.

Networking capability

• The TBV123-AN powered loudspeaker and TBV118L-AN subwoofer offer remote control via USB. The USB connection allows the user to configure and monitor all DSP parameters using dedicated software for PC.
• The DSP firmware can also be updated via the USB connection. Visit turbosound.com for the latest firmware version.
• The TBV123-AN powered loudspeaker and TBV118L-AN subwoofer also offer proprietary ULTRANET networking capabilities through the ULTRANET IN and ULTRANET
• THRU connections using CAT5 cables with RJ45/Neutrik etherCON connectors. ULTRANET allows the user to transmit unidirectionally up to 16 independent channels of 24-bit audio throughout the TBV-AN system, as well as other ULTRANET-equipped devices such as digital mixers and personal monitor systems.
• Up to 7 devices can be connected in series on a single ULTRANET cable.

Mains power connection

• The TBV123-AN loudspeaker and the TBV118L-AN subwoofer also facilitate mains power connection using power cables with Neutrik power CON locking power connectors.
• To set up mains power between TBV-AN loudspeakers, first run a power cable terminating in a power CON connector to the AC INPUT connector on the rear panel of the first unit. To power additional speakers downline, run power cables equipped with power CON connectors at both ends from the first speaker’s AC LINK OUTPUT to the AC INPUT of the next TBV-AN loudspeaker in series.
• The maximum number of linked systems depends on the AC supply voltage as well as the maximum current draw of the individual systems in the power chain. linking a power chain, make sure that the integrated connectors, as well as the supplied AC mains cable, are never overloaded.
• If you are uncertain how to calculate the total current draw, please contact your dealer.
• Always turn off the power to the units before making connections.

TBV-AN DSP Menu Structure

Rigging and acoustic simulation software

Only authorised and certified personnel shall design and install suspended configurations, following the instructions and procedures in the rigging manual supplied with the TBV123-FB flybar or downloaded from turbosound.com. Failure to follow these instructions may lead
to death or permanent injury

Ground stacking

Only authorised personnel shall design and install ground stacked configurations, following the instructions and procedures in the rigging manual supplied with the TBV123-FB flybar, or downloaded from turbosound.com. Failure to follow these instructions may lead to death or permanent injury

Pole mounting

The TBV123-AN loudspeaker can be pole mounted on top of the TBV118L-AN subwoofer using an optional pole that screws into the subwoofer. Three different length poles are available. There are two pole mount holes on the TBV123, that allow the loudspeaker to be mounted straight or tilted down.
A maximum of two TBV123-AN loudspeakers may be pole mounted on up to two TBV118L-AN subwoofers provided that the stacked system is physically secured to the stacking platform.

Technical Specifications

Important information

•  Register online. Please register your new MusicTribe equipment right after you purchase it by visiting musictribe.com Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
•  Malfunction. Should your MusicTribe Authorized Reseller not be located in your vicinity, you may contact the MusicTribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
•  Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FCC

• Responsible Party Name: Music Tribe Commercial NV Inc. Address: 122 E. 42nd St.1, 8th Floor NY, NY 10168, United States
• Email Address: legal@musictribe.com

TVB-AN BERLIN SERIES

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

•  this device may not cause harmful interference, and
•  this device must accept any interference received, including interference that may cause undesired operation.

Warning: Operation of this equipment in a residential environment could cause radio interference.

Important information:

Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment. Hereby, Music Tribe declares that this product is in compliance with Directive 2014/35/EU, Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/ EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC. Full text of EU DoC is available at https://community.musictribe.com/

• EU Representative: Music Tribe Brands DK A/S
• Address: Gammel Strand 44, DK-1202 København K, Denmark
• UK Representative: Music Tribe Brands UK Ltd.
• Address: 6 Lloyds Avenue, Unit 4CL London EC3N 3AX, United Kingdom

References

• Music Tribe
• Music Tribe
• Music Tribe
• Music Tribe
• Music Tribe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>