Bestway S100201 Jacuzzi Pump Instruction Manual
- June 15, 2024
- Bestway
Table of Contents
Bestway S100201 Jacuzzi Pump
For assistance, please visit www.bestwaycorp.com/support
Table of Contents
- Important Safety Instructions – pg 097
- Pre-Setup – pg 107
- Installation – pg 110
- Using the Spa – pg 110
- Maintenance – pg 112
- Dismantling and Storage – pg 112
- Troubleshooting – pg 113
- Error Messages – pg 115
Important Safety Instructions
Read and follow all instructions carefully before setting up and using the spa. These warnings, instructions, and safety guidelines address some common risks of water recreation, but they cannot cover all possible risks and dangers. Always be cautious and use common sense when engaging in any water activity. Save this information for future use. Additional information can be obtained depending on the spa type. Keep these instructions in a safe place. If instructions are missing, please contact the manufacturer or search for them on www.bestwaycorp.com.
Pre-Setup
Check the parts listed on the packaging and ensure they match the model you plan to purchase. In case of damaged or missing parts upon purchase, visit our website bestwaycorp.com/support.
Choose the right location for both indoor and outdoor, above-ground and portable spa installation. For all spas, ensure the selected surface meets the following technical characteristics:
- The combined weight of the water and spa users is significant; it is essential that the chosen surface can evenly bear the weight during the entire time the spa is open.
- For outdoor setups, an adequate drainage system must be in place to catch any overflow water. During filling, draining, or use, water may flow out of the spa.
Installation
Follow the installation instructions depicted on the packaging. Drawings are for illustration purposes only and may not represent the actual product. Not to scale.
Using the Spa
Control Panel
- AirJet
- AirJet with Wi-Fi
- Lock/Unlock Button: The pump has an automatic lock of 5 minutes, indicated by a lamp. Press and hold the lock/unlock button for 3 seconds to lock or unlock.
- Energy Saving Timer Button: Designed to prevent energy waste by setting the time and duration of the heating cycle. Follow the steps to activate the Energy Saving function.
**Maintenance
**
Ensure the pump is unplugged before beginning maintenance to avoid the risk of injury or death. Regular cleaning and proper water treatment are crucial for keeping the spa in good condition.
- Filter Cartridge: Clean or replace the filter cartridge to optimize the filtration system performance.
- Cover: The cover should be cleaned with a cleaning agent suitable for PVC material.
- Water: Adjust pH and chlorine levels according to the recommended values.
Dismantling and Storage
Instructions for dismantling and storing the spa are provided to ensure
proper care and to extend the lifespan of the product.
Troubleshooting
For issues such as the pump not working or the water not heating properly, potential causes and solutions are offered. If troubleshooting does not resolve the issues, visit www.bestwaycorp.com/support for assistance.
Error Messages
The manual provides explanations for various error messages that may be
displayed by the spa’s systems and offers solutions to address them.
Specifications
| Specification | Massage Jet Power | Heater Power | Water Pump Power |
|---|---|---|---|
| 220-240V AC, 50/60Hz, 2050W at 20°C | 800W | 2000W at 20°C | 50W |
Disposal Instructions
Do not dispose of electrical products with household waste. Please recycle where facilities are available. Contact your local authority or retailer for recycling advice.
Thank you for choosing Bestway! Receive an immediate free warranty extension upon purchase. Register your product within 30 days of the purchase date, and we will provide you with 6 months of free warranty extension. Visit WWW.REGISTREERBESTWAY.BE and register your product directly. This warranty extension applies to the following countries: Belgium, Luxembourg, Italy, France, Germany, and Spain.
For complete installation, maintenance, and troubleshooting instructions with detailed images, refer to the user manual provided with the product.
FAQ
What should I do if my spa is leaking?
Use the provided repair patch and check the air valves for leaks. If the problem persists, contact customer support.
How can I maintain the water quality in my spa?
Regularly clean the filter cartridge, maintain proper pH and chlorine levels, and follow the water treatment guidelines in the user manual.
What are the recommended safety precautions when using the spa?
Read and follow all the safety instructions before using the spa, keep the area around the spa clear, and do not use the spa alone.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>