Hodozzy Apple B09N3C1C3Y Carplay Single Din Car Stereo Installation Guide

Hodozzy Apple B09N3C1C3Y Carplay Single Din
Car Stereo Installation Guide

Attention

1. The abnormal situation occurring during operation, please pressing reset key on the panel to restore factory settings.
2. When the in-car temperature is much higher or lower, please adjusting the temperature inside the car first before using this machine.
3. Avoiding strong shocks because they can damage the mechanical parts and structural components.
4. This machine is composed of high-precision parts, please do not dismantle machine cover or adjust any parts, if you need maintenance please go to the professional after-sales service center to accept the service.
5. Please follow the instruction manual, the damage caused by the illegal operation is noting the warranty scope.

Specification

7-inch double spindle wiring diagram

Function brief

• • Support the Audio playback format of MP3/WMA/WAV/ e M KV/FLAC/OGG/ APE.
• Support the Video playback format of RM/RMVB/DVD(VOB)/ VCD(DAT)/MP1/MP2/DIVX/XVID/MP4/H263/H264/FLV/3GP/ e SWF/AVI/ASF/MJPEG etc;
• Support the picture format of JPG/BMP/PNG etc
• Rearisen camera Function
• Right turn blind area detection function
• HD digital TFT screen
• Multi screen display
• Two channel video output
• Two channel audio output
• One channel audio and video input interface
• Super-clear FM radio, can store 6 stations, support AM, RDS function
• Clock Function
• With Remote Control
• Support memory card, U disk
• Song Name Display Function
• File navigation
• Power off memory function
• Firmware upgrade
• Colourful lamp
• BT function
• Touch function

Basic operations:

1. Rear-view function:
   Input the video signal of the rear view camera from the corresponding rear view terminal, the line of the reversing
   lamp is connected to the reversing control line of the machine, the reverse image state is automatically switch back image status.

2. Visual function of right turning blind area：
   Connect the video signal of the right steering camera to the corresponding video input terminal, Connect the right turn light line to the machine right turn detection line, When the car turns right on, it automatically switches to the right Blind Area Image Function.

3. Multi-screen Same Display Function:
   1. Connect the video output terminal of the host computer to the video input terminal requiring the same display device, so that the picture of the host computer can be displayed at the same time, Multiple devices can be supported for simultaneous display.

4. Audio and video input function:
   1. Connect audio and video devices that need input to the host AUX input interface, and select AUX function in the host interface.

1. MUTE
2. MODE
3. POWE
4. MENU
5. VOL+
6. VOL –
7. Play / pause
8. Previous
9. Next
10. Answer
11. Hang up
12. Number

Main interface

1. Volume icon: click pop-up volume adjustment.
2. Time display: click enter time adjustment interface
3. BT/memory card/ U disk, status display (no change status, no display)
4. Function button: Click to enter the corresponding function interface, right slide can turn page
5. Return Desktop button
6. Voice Assistant button
7. Click to switch day/night/standby mode

FM

1. Band switching FM1/2/3/AM1/2, support RDS .
2. Forward/backward search
3. Automatic scanning storage
4. List of Save Table Play
5. Stereo Switching
6. Long-range or Short-range Switching
7. Radio button, short press switch to preset station, long press save current station
8. Radio frequency forward/backward fine-tuning

BT

1. Top to bottom 5 button functions: Dialing dial , Telephone Book, Telephone records, BT music, BT information
2. Short press input 0, long press input+
3. Dial button.
4. Empty input content
5. Delete key

EQ setting mode

1. From top to bottom 6 button: set, EQ sound, display setting, dock, background, steering wheel remote control, click into the corresponding interface
2. Forward/backward selection EQ effects
3. EQ custom adjustments
4. Click Enter Speaker Effect Interface
5. Click Enter the EQ Adjustment Interface
6. From left to right 5 buttons: left front, right front, left rear, right rear, all car, click the corresponding button, the sound output bias to the corresponding horn
7. Sound output amplified
8. Manually adjust sound output direction

Music

1. Previous, Pause, Next.
2. EQ
3. Loop play
4. Random play
5. Song serial number / total number of songs, click pop-up serial number selection, play the selected song.

Video

Display Setting Interface

Time setting interface

1. Picture Screen Proportional Selection.
2. Time adjustment area: year, month, day, hour, minute, second, click adjust.
3. Reset button.
4. Time adjustment area: year, month, day, hour, minute, second, click adjust.
5. Confirm button.
6. 12/24 hour selection button.

Mirror link

Support for multiple mirror link: connect data lines, Open USB debug, Mobile phone pop window trust authorization click allow. (If click error, reconnect data line)

1. Languages: English, Chinese, Arabic, Israeli, Turkish, Russian, Persian, Thai, German, French, Portuguese, Spanish, Italian, Indonesian
2. Colourful Lights Set.
3. Rear view Mute Switch.
4. Automatic front view switch.
5. Brightness adjustment, screen calibration.
6. Radio Area Settings.
7. Boot screen settings, password :1983.
8. Background Screen Settings.
9. Host Information View.
10. Resume factory setting.

Introduction to Panel Features

1. Power
2. Back to desktop
3. Vol+
4. Vol-
5. AUX input
6. Reset hole
7. TF card slot
8. USB
9. Remote control receiver
10. Microphone
11. Microphone
12. Remote control receiver
13. Power
14. Previous
15. Knob
16. Next
17. Return
18. Reset hole
19. AUX input
20. USB/Memory card slot

( Adjust the volume by rotating, Press the EQ, length to reset and restart for 10 seconds)

Main functions of single spindle

1. Remote control receiver
2. AUX input
3. Reset hole
4. Microphone
5. USB
6. Memory card slot

Product display

1. Product panel picture
   

2. Picture back of product
   

3. Product wiring diagram
   

4. Product size
   

5. Product installation drawing
   
   Screen Installation Sequence

6. Power & Speaker Cable Instruction:

7. Backup Camera Wires Connection

• 7.1 Camera’s power cable: red and black.
  — Red connect to reverse light positive, black to reverse light negative.

• 7.2 Camera’s RCA cable: yellow port.
  —- Insert into CAMIN port (yellow) on the radio

• 7.3 Trigger cable: cable named “back in” on the radio backside harness, according to the wiring diagram label on machine bottom. — Connect this cable to reverse light positive wire of the car.
  Note: with this method, the short red cables beside the RCA port don’t need to connect. Thus, when you pull the reverse gear, the device will show rear view image automatically.
  Note: For different radio and producing, wires color and function may be changed slightly. Please refer to the wiring diagram stacked on the bottom of the radio as standard.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>