XHDATA D-901 Radio With MP3 Player and Bluetooth User Manual
- June 9, 2024
- XHDATA
Table of Contents
XHDATA D-901 Radio With MP3 Player and Bluetooth
Function button description
- Mode switch
- Previous key
- Play /pause key
- Next key
- DC 5V Input socket
- Charging LED indicator
- Power switch
- Function button
- Earphone jack
- TF card socket
- USB socket
- Antenna
- Aux input /FM/SW external
- antenna socket Radio/MP3 indicator light
- LED lighting
- Flashlight switch
- Radio band switch button
- Volume buttoon
- Radio tuning button
- Mp3 Display
Radio function operation
- Turn on the power switch (7) to the radio gear and adjust the right volume.
- Push the function switch 16 to the band you need: AM/ FM1-2 /SW1-9
- When listening to FM or SW band, please pull out the rod antenna and adjust it to the best receiving angle. When listening to AM band, please rotate the body to adjust to the best-receiving angle 11)
- Turn the tuning button 18 slowly to select the radio station
USB/ TF MP3 playing function
- Turn on the power switch to MP3 and adjust the right volume.
- Insert the USB or TF card into the corresponding socket (9) 10
- Short press the previous (2) or next (4 button to select the previous or next song. Long press these two buttons reverse or fast forward function. (Forward and backward only TF and USB)
- Short press 3 to pause. Press again to resume playback.
- Long press is Bluetooth short press in order to play Bluetooth /USB .
Wireless music play function
-
Turn on the power (7) Switch to MP3 and adjust the right
volume. -
When the USB or TF card is not plugged in, the machine will play Bluetooth by default.
-
Turn on the Bluetooth connection of mobile phone ” D-901″
-
Short press the previous or next button to select the previous or next song.
-
Long press the “play” key 3 for 3 seconds to forcibly disconnect the currently connected device, and then press it again to restore the connection.
Charging function operation
- Plug the charging cable into the “DC 5V in” charging port and the other end into the 5V USB output port of the mobile phone adapte r.
- When the battery is fully charged, the LED is off.
LED lighting operation
- Turn on the flashlight switch (15 to light up the torch.
- When using dry battery DC3v power supply, the flashlight cannot be lit because the voltage is no more than 3.3V.
AUX input/ FM/SW external
- Turn the function switch 7 to MP3, plug the external audio cable into aux jack 12 and briefly press M key to “aux” (Only MP3).
- When listening to FM/ SW band, plug the external enhanced soft antenna plug into the external antenna port 2 to enhance the reception effect (FM / SW Radio only)
SPECIFICATIONS
- DC IN 5V 500mnA
- DC: 3V(UM1X2)
- FM 1: 87-108MHZ
- FM 2: 64-108MHZ
- AM: 520-1730KHZ
- DC: 3.7V (18650)
- SW1 -9: 4.75-22.0MHZ
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>