level one GSW-1657 16 Port Gigabit Switch Installation Guide
- June 2, 2024
- level one
Table of Contents
level one GSW-1657 16 Port Gigabit Switch Installation
Installation
LEDINDICATOR
| LEDIndicator | Status | Meaning |
|---|
Power
| Solid green| Power is on.
Off| Power is off.
Link/Act/Speed
| Solid green| A device is connected to the port at a speed of 1000Mbps
Solid orange| A device is connected to the port at a speed of 10/100Mbps
Flashing| Sending or receiving data
Off| The port is NOT connected.
Mode Control
You can select the switch mode.Normal mode: All ports can communicate with each other.Flow control mode:Flow control function close, all ports cancommunicate with each other.VLAN mode:1~14 ports can not communicate with each other, but can communicate with 15~16 ports. Extend mode:Speed of 1~8 ports is reduced to 10 Mbps, transmission distance can reach 250m.
Connecting Equipment
Step1. Inspect the Power Adapter carefully, and make sure that it is
properly connected to a power source.
Step2. Plug-in the Power Adapter to the Switch.
Step3. Connect your network devices with the switch by using Ethernet
cable. (e.g. Cat-5e)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>