HAMRON 006838 FLASHLIGHT BAR LED

SAFETY INSTRUCTIONS

CHARGING

Make sure to do the charging in a suitable place and that the right charger is used. Never connect an unknown charger, or a charger, charging cable or battery that can be suspected to be defective. Otherwise, there is a risk of overheating and in the worst case fire. Do not leave the battery unattended when charging.

WARNING

• Do not look into the light without wearing eye protection, risk of dazzling and/or eye damage.
• Magnetic mounting of warning devices is not recommended for moving vehicles. Screw mounting is recommended for moving vehicles. Use is at the discretion of the user.

TECHNICAL DATA

DESCRIPTION

1. Power switch
2. Flashing pattern button FIG. 1

ASSEMBLY

WITH 4 WIRES

• RED: +VDC
• BLACK: – Ground
• YELLOW: Flash pattern selection.
• WHITE: Synchronization. Connect White wires of all heads together for synchronization.

USE

CHOICE OF FLASHING PATTERN

• Less than 1 second for the next pattern
• 1 to 3 seconds for the previous pattern
• 3 to 5 seconds back to pattern #1
• More than 5 seconds for turn off, when power is reapplied it will resume the previous pattern.

Table of flashing patterns

1| Single flash (R65)|

---|---|---

2| Double flash (R65)

3

5

| Triple flash (R65)

Quad flash (R65) Eight flash

6| Single flash half to half (R65)

7| Double flash half to half (R65)

8| Triple flash half to half (R65)

9| Quadflash half to half (R65)

10| Eight flash half to half

11| Cross flash

12| All-halfflash

13| All-Single-Quick flash

14| CCW Single flash

15| CW Single flash

16| CCW constant flash

17| CW constant flash

---|---

18| CCW Rotation flash

19| CW Rotation flash

20| Middle to side constant

21| One-one single flash

22| Double flash

23| Eight flash

24| Half Steady Half Single

25| Half Steady Half Single

26| Steady on

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>