iskydance L4-M RF to 4 Channel 0-10V LED Dimmer User Manual
- June 4, 2024
- iskydance
Table of Contents
iskydance L4-M RF to 4 Channel 0-10V LED Dimmer
RF to 4 Channel 0-10V LED Dimmer
Model No.: L4-M
AC or DC input/4 channel 0-10V signal output/Wireless remote control
Features
- RF to 4 channel 0-10V converter, powered by AC or DC input.
- Output 4 channel 0-10V signal, connect with 0/1-10V dimmable driver.
- 256 levels 0-100% dimming smoothly without any flash.
- Match with RF 2.4G single color, dual color and RGB/RGBW remote control.
- One RF controller accept up to 10 remote control.
- Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
- Synchronize on multiple number of controllers.
- Light on/off fade time 3s selectable.
Technical Parameters
Input and Output
Input voltage| 100-240VAC
12VDC
Output signal| 4 x (0-10)VDC
Output current| 4CH,10mA/CH
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Dimming data
Input signal| RF 2.4GHz
Control distance| 30m(Barrier-free space)
Dimming range| 0 -100%
Dimming curve| Linear
Environment
Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| T c: +65OC
IP rating| IP20
Weight
Net weight| 0.560kg
Gross weight| 0.068kg
Mechanical Structures and Installations
Wiring Diagram
Note:
- User can connect AC100-240V power or DC12V power adapter as power input.
- We recommend the number of LED drivers connected to each 0/1-10V output does not exceed 50 pieces,
The maximum length of the wires from dimmer to LED driver should be no more than 50 meters.
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
-
Match:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote. -
Delete:
Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted.
Use Power Restart
- Match:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.
.Delete:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.
Available remote controller
If you use one receiver, you have two choices:
Option 1: Match with RS6 4 channel dimming remote, 4 channel 0-10V signal can
be controlled independently. Option 2: Match with RT1 one zone dimming remote,
4 channel 0-10V signal can be controlled synchronously.
If you use multiple receivers, you have two choices:
Option 2: Match with RT1 one zone dimming remote, multiple receivers can be
controlled synchronously,
and 4 channel 0-10V signal of each receiver are same.
Option 2: Match with RT6 four zone dimming remote, each receiver(one or more)
in a different zone.
Dimming curve
Note:
When the output channel is off, the output dimming signal is 0V.
Please read the dimming section of the 0/1-10V dimming driver manual.
If the dimming characteristic curve is the same as below,
it will not be able to turn off the lights, you need select other models of
1-10V dimmer which have AC OUT function.
Light on/off fade time
Long press match key 5s, then short press match key 3 times, the light on/off
time will be set to 3s, the indicator light blink 3 times. Long press match
key 10s, restore factory default parameter, the light on/off time also restore
to 0.5s.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>