iskydance S3 RGB-CCT-Dimming 3 Channel High Voltage LED Strip Controller Instruction Manual

June 8, 2024
iskydance

iskydance S3 RGB-CCT-Dimming 3 Channel High Voltage LED Strip Controller Instruction Manual
iskydance S3 RGB-CCT-Dimming 3 Channel High Voltage LED Strip
Controller

Features

  • 3 channel high voltage LED strip RF 2.4G controller, can control maximum about 50 meters of high voltage LED strip, different LED strip may have difference.
  • Match with RF 2.4G single zone or multiple zone single color, dual color and RGB/RGBW remote control.
  • One RF controller accept up to 10 remote control.
  • 4096 levels 0-100% dimming smoothly without any flash.
  • When using with RGB light, built in 10 dynamic mode, include jump or gradual change style.
  • Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
  • Synchronize on multiple number of controllers.
  • Fade in and out effect selectable.

Technical Parameters

Input and Output

Input voltage| 110-240VAC
Input current| 3.2A
Output voltage| 3 x (110-240)VDC
Output current| 3CH,1A/CH
Output power| 3 x (110-240)W
Dimming data

Input signal| RF 2.4GHz
Control distance| 30m(Barrier-free space)
Dimming level| 4096 levels
Dimming range| 0 -100%
Dimming curve| Logarithmic
PWM Frequency| 2KHz
Safety and EMC

EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Weight

Net weight| 0.117kg
Gross weight| 0.136kg

Mechanical Structures and Installations

Mechanical Structures and Installations

Wiring Diagram

Wiring Diagram

Caution:
This controller apply for high voltage LED strip, please carefully ensure all wire connections and polarities are correct and secure before applying power, otherwise this controller or high voltage LED strip will be damaged.

S3 connect with dual color LED strip

Wiring Diagram

S3 connect with single color LED strip

Wiring Diagram

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match keyMatch:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote.

Delete:
Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

.Delete:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

Fade in and Fade out Setting

Long press match key 5s, then short press match key 3 times, The lighting effect will be set to the fade in and fade out in 3s, the indicator light of LED controller blinks 3 times. Long press match key 10s, restore factory default parameter, the light on/off time restores to 0.5s.

RGB dynamic mode list

No. Name No. Name
1 RGB jump 6 RGB fade in and out
2 RGB smooth 7 Red fade in and out
3 6 color jump 8 Green fade in and out
4 6 color smooth 9 Blue fade in and out
5 Yellow cyan purple smooth 10 White fade in and out

Application notes

All the receivers in the same zone.

Receivers in the same zone

Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be extended. Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlledby the same remote, under same dynamic mode and with same speed. Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range. We recommend for indoor applications that receiver placements should be no further apart than15m.

Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.

Different zone

Dual color control

WW=Warm white LED
CW=Cool white LED
Each channel can supply up to 240W@240VAC and white balance can be controlled as such:

Color temperature Cool white Neutral white Warm white
Power distribution WW=0W,CW=240W WW=120W,CW=120W WW=240W,CW=0W

GRAPH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

iskydance User Manuals

Related Manuals